Thanks all, lots to ponder. I rarely run across anything larger than 20" OD...so I was thinking a threaded fixture, kinda like a "door-stopper" with a spring on one side and a wing-nut on the other, to tighten it down. The spring would have an insert at the desired length. A short, stout spring would have some flexibility, and a wood dowel to stick in it would /could be considered a consumable item. I'll have to play with a few ideas. lukem has a good idea, I'll look into strong magnets, that may work without any drilling. BTW......... How do magnets work?
I'm going to try a magnet so I don't have to use he wing nut to hold the 17" rod on the bar. Still have a stud to go in the 1/4" hole in the bar. Ordered 2 earth magnets, 1" diameter circle , Will post when I make the new 17" rod. Will be easier on & off. Like you idea using a door stop spring. The rods I've made are from broken graphite fishing poles. Light & tough
If you have an old computer hard drive laying around you can salvage two very strong magnets from it. I prefer a strong spring mounted to a bar nut.
Hi all, 1st post.. lukem is correct, the neodymium magnets are very strong! There is a firewood measuring tool on ebay that uses one. It looks to be only about the size of a quarter and is rated a 48 lbs pull force. I made one using an old fishing pole and a magnet off a trouble light but its pretty bulky. The results are good though, nice consistent lengths (17") with no pre-measuring.
Welcome to FHC, GLJ! You found a great site. I tried a trouble light magnet, something went haywire. Figured it would hold, but not so much. So back to the drawing board.
I dont use these. Just saying I'm not into things hanging on my bar. Quick Stix Tired of your firewood having uneven lengths? Here is the solution! Quick Stix easily mounts to most chainsaws including Stihl, Husqvarna, Echo and Poulan to quickly and efficiently measure out the lengths of your firewood without stopping. One set of stix include 14", 16" and 18" lengths. http://www.baileysonline.com/Forest...ing-Guide/Quick-Stix---Firewood-Log-Guide.axd
