That's exactly how mine is. I used furnace cement to make a seal. But I have to replace the cement every year
It made several news channel's around here. My son came home to the rear sliding glass door being broken [ATTACH] This news story is not really...
Had a great time! Even though I had a Billy/Ram break into my home Friday morning which prevented me from showing up Friday evening. I still...
Clock on his screen name then click "Start a conversation". [ATTACH] [ATTACH]
We still have our freestanding Enerzone upstairs for cooler nights. Not a bad option to have a back up, but I did fire up the Fahrenheit last...
Same. Until we dont need it. We have an upstairs freestanding stove. So on chilly nights, the Enerzone kicks on to take up the slack. But we use...
T-stat. It's on Fuelmizer above above freezing. And on Tstat mode below freezing. We haven't used manual in years.
Finally cleaned my 50F fir the time in a few weeks. It was dirty, but still ran good and produced food heat numbers. Pics are of ash build up on...
You know me to well Backwoods Savage :D
It is tight, but with the flex material we made it work and I have plenty of air flow. Our damper is 1/4 to 1/3 closed. We used to close it...
Mine is flex 3" dryer vent material (most is 4", but this was labeled the same). I just pinched it on, put a hose clamp on and we have full...
Take that 3" vent and a Hose clamp and just get it tight
Shhh...:whistle: Absolutely. Hung over or not. When it's time to work, you have to get everyone up!! :rofl: :lol::yes: Same, I would make sure...
Agreed. The relight plate has nothing to do with normal air flow (only when it is doing a Pot change). That furnace is made by SBI, and uses the...
These first 2 pics are the woodstove OAK. We went a couple feet off of the house with it (3" gas vent cap bent on an angle). [ATTACH] [ATTACH]...
This is inside. I'll go outside once I put my daughter to bed. Standard 3" rigid venting from outside to inside, then some 3" flex vent to the...
Going to mark this as unread. But I'll post pics soon!
SBC Pellets furnaces - Caddy Alterna II | Caddy Furnaces This is a furnace made by the same company that makes my Enerzone Eurostar. Probably...
Pics above were old (except the free standing upstairs pellet stove) and the pellet furnace was not even plugged into the outlet. This is a recent...
As others said, secondary tubes and the doghouse are are not controlled by the primary air lever. The secondary air is a large square tube near...