Pelpro Pellet Jam caused new style round 2 RPM Auger Motor to leak grease. Is the auger motor bad? C

Hello
The grease can be wiped off and then the 2 RPM round auger motor can be tested with the Quadra-Fire Adapter and AC test cord.
It tested good see timer with test setup here!
See how to test the auger motor here.
(1) Testing the newer HHT Pelpro 2 RPM auger motors with connector and capacitor for PP60 / PP60-B / PP7 | Firewood Hoarders Club
The grease can be easily replenished. In fact I would check and add grease every 3 years to keep it properly maintained and replace the bronze auger bushing if it is scored or broken. See pics below
Pic 1 - 2 -- Pelpro round 2 RPM auger motor leaking grease
Pic 3 - Remove the 3 bottom Phillip head screws to see the gears.
Pic 4 - Gears with a little less grease
Pic 5 - Adding some Red & Tacky grease from Home Depot with Grease Gun
Pic 6 - Smooth and push grease into gears
Pic 7 - All done and good as new!
Lucas Oil 14 oz. Red 'N' Tacky Grease 10005 - The Home Depot

 

Good vid on using Red & Tacky on small metal gears