Have a slightly used like new bar and 2 chains purchased from Bailey's last year One of the chains like new other was used with the bar for a few cuts. specs:Cutting Length 20" (50cm)Pitch .325" Gauge .050" (1.3mm) Narrow Kerf Drive Link Count 78 This is what they will fit Echo: CS-400EVL (.325" Pitch), CS-440, CS-440EVL, CS-450, CS-450P, CS-500P (.325" Pitch), CS-520, CS-530, CS-550P (.325" Pitch)Efco: 147, 152, 156 (.325" Pitch), 962Fairmount Hydraulic: 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513, LimblopperHitachi: CS40EAHomelite: 130, 150, 150A0, 290, 300, 340, CS50, d3350bHusqvarna: 133, 136, 137, 140, 141, 142, 154, 234, 235, 238, 240, 242, 246, 254, 257, 260, 261, 262 XP, 33, 336, 339 XP, 340, 345, 346 XP, 350, 351, 353, 36, 38, 40, 41, 42, 435, 44, 440, 444, 445, 45, 450, 450 Rancher, 455, 455 Rancher, 49, 50, 51, 543 XP, 545, 55, 55 Rancher, 550 XP, 555, 560JohnDeere: CS46, CS52, CS56, CS62Jonsered: 2036 (.325 Pitch), 2040 (.325 Pitch), 2041 (.325 Pitch), 2045 (.325 Pitch), 2050 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325 Pitch), 2055 (.325 Pitch), 2063 (.325 Pitch), 2141 (.325 Pitch), 2145 (.325 Pitch), 2149 (.325 Pitch), 2150 (.325 Pitch), 2159 (.325 Pitch), 2163 (.325 Pitch), 370, 410, 420, 425, 435, 440 (.325 Pitch), 45, 450, 451, 49, 490, 50, 51, 510, 52, 520SP, 521, 525, 535, 590, 941, CS 2040 (.325 Pitch), CS 2147 (.325 Pitch), CS 2150 (.325 Pitch), CS 2152 (.325 Pitch), CS 2153 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2240 (.325 Pitch), CS 2245 (.325 Pitch), CS 2250 (.325 Pitch), CS 2252 (.325 Pitch), CS 2253 (.325 Pitch), CS 2255 (.325 Pitch), CS 2258 (.325 Pitch), CS 2260 (.325 Pitch)Makita: DCS430, DCS431, DCS520i, DCS6000iMaruyama: D176-PL11, D176-PS11McCulloch: 2046AV, 2049AV, 46, 4700, 4900, 5000, 5500, MS1849, MS1850, MS2046, MS2049, MS2050, PM1845AV, ProMac 40, Silver Eagle 2818, Silver Eagle 3020, TimberBear20Olympyk (Oleo-Mac): 941, 945, 950, 951Partner: 410, 540, P-360, P-400, P-450, P-500, P-5000, PS-510 (.325)Pioneer: 1074, P-21, P-26, P-28Poulan/PoulanPRO: 235, 240 (.325 Pitch), 325, 525, S35RedMax: G390, G450AVS, G455AVSSears/Craftsman: 35084, 35201Shindawa (SDK): 5000Solo: 613, 614, 631, 632, 638, 639, 641, 644, 645, 647, 650, 651, 651SP (.325" Pitch), 651SP, 652 (.325" Pitch), 654 (.325" Pitch), 656 (.325" Pitch)Stanley: CS05, CS06Stihl: 023, 025, MS 210, MS 211, MS 230, MS 231, MS 241, MS 250, MS 251Tanaka: ECS-4000, ECS-4000B, ECS-415, ECS-4501, ECV-4501, ECV-5601, TCS 40EATroy Bilt: TB4620, TB4920, TB5018, TB5020 Nothing wrong with the bar other than slight use. $30.00 dollars plus shipping
