In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

What's up today (bullchiting) thread.

Discussion in 'Everything Else (off topic)' started by Gasifier, Oct 6, 2013.

Page 2448 of 5429
  1. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    29,167
    Likes Received:
    166,400
    Location:
    SE Wisconsin
    Actually you can go into the computer and pull the run hours from it.... Assuming that the ECU is the same from the engine. Then there's the whole dealio about someone putting that kind of work into a project, and not either putting a fresh new crate engine in it, or at least rebuilding the engine.
    It's all about documentation at that point. Receipts, pics of the build, etc.
     
    Horkn, Jul 15, 2018
    #48941 Top
    savemoney, wildwest, brenndatomu and 5 others like this.
  2. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    29,167
    Likes Received:
    166,400
    Location:
    SE Wisconsin
    Waiting for the wife to wake up so we can head out to the lake again today. It's going to be a fairly hot one today. High dew point, mid 80's and very little wind.
     
    Horkn, Jul 15, 2018
    #48942 Top
    savemoney, wildwest, brenndatomu and 5 others like this.
  3. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,479
    Likes Received:
    54,102
    Location:
    Ovid
    I’ve got a 4.8 that I beat the snot out of and it’s increadably reliable.

    I’m about to have the truck repainted. It’s at 183,000 miles and is the most problem free vehicle I’ve owned hands down.

    I thought I’d hate it but it has proven me wrong every time. Might not have the power of the 5.3 but it has enough to get it done and holds up well.

    9B254908-9F24-4A88-B1F6-B5DF2C075A6F.jpeg C5A296A7-06AD-4CEA-81D6-DB8FBA567B93.jpeg 2B0EB8AF-E70A-4F3E-BFF1-E33F543E0877.jpeg 41F3D085-D7E3-4E4F-9553-06219201DA2F.jpeg
     
    Pallet Pete, Jul 15, 2018
    #48943 Top
    savemoney, wildwest, brenndatomu and 10 others like this.
  4. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    29,167
    Likes Received:
    166,400
    Location:
    SE Wisconsin
    Yeah, you've got one, so does Eric. Iirc. They are ok. But underpowered and offer nothing over the 5.3. same weight, less power, because it's just a debored and probably destroked 5.3.

    Ford did that with the old 5.0 block and made a 4.2 V8 by having a smaller bore. It didn't work out that well. Reliable yes, but less power and no real gains in measurable mpg.
     
    Horkn, Jul 15, 2018
    #48944 Top
    wildwest, brenndatomu, NortheastAl and 6 others like this.
  5. clemsonfor

    clemsonfor

    Joined:
    Oct 3, 2013
    Messages:
    15,996
    Likes Received:
    37,478
    Location:
    Greenwood county SC
    It's kind of like don't feeds the bears. There federally or state protected there and they dont want them to become dependent on handouts.
     
    clemsonfor, Jul 15, 2018
    #48945 Top
    savemoney, bogieb, wildwest and 8 others like this.
  6. clemsonfor

    clemsonfor

    Joined:
    Oct 3, 2013
    Messages:
    15,996
    Likes Received:
    37,478
    Location:
    Greenwood county SC
    Yea you can go in computer but I was thinking along what you said, you possible have 3 trucks there, maybe jut 2? You don't know, and I agree, I'd get a GM crate motor if I was doing all that.
     
    clemsonfor, Jul 15, 2018
    #48946 Top
    savemoney, wildwest, brenndatomu and 5 others like this.
  7. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,479
    Likes Received:
    54,102
    Location:
    Ovid
    Power
    4.8 270-290hp 285-305 ft lb torque

    5.3 270-305hp 315-335ft lb torque

    The big difference is the stroke it’s still got all the goodies that make LS engines great. The stroke is 3.267 on the 4.8 and the 5.3 is 3.622.

    Now that I’ve owned one I have thoroughly changed my mind about the 4.8 it is a gooder engine. Not really any different than the way gm has done things like 305 and 350 it’s nothing new except they finally did a good job. I hated the 305.
     
    Pallet Pete, Jul 15, 2018
    #48947 Top
    wildwest, brenndatomu, NortheastAl and 6 others like this.
  8. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    24,545
    Likes Received:
    141,531
    Location:
    US
    Here’s the pic of the sign, probably posted on every rental home here...
    F014C6EE-3256-4945-BA27-FA9261B111A0.jpeg

    Streets show up on Goo goo maps, but it’s laid out all willy nilly-
    591B43B6-3EB1-4D0D-838C-F67BB72D372C.jpeg
     
    Eric VW, Jul 15, 2018
    #48948 Top
    savemoney, yooperdave, papadave and 12 others like this.
  9. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    24,545
    Likes Received:
    141,531
    Location:
    US
    Absolutely no gain, probably worse really, mpg.
    Could be the way mine is geared since it’s a W/T model.... don’t have much of a reference on comparing power, but 4 Low in my truck would climb a house. :yes:
     
    Eric VW, Jul 15, 2018
    #48949 Top
    wildwest, brenndatomu, NortheastAl and 5 others like this.
  10. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    29,167
    Likes Received:
    166,400
    Location:
    SE Wisconsin
    Ex fiance had a new 1500 Chevy with the 4.8. she got a smoking deal on it. She hated it, I drove it and didn't like it either. She ended up getting a 4.6 liter Ford and was much happier.

    It's not a bad engine, by no means, but it was a downsized, from an already downsized engine ( 5.7). I don't buy GM power ratings. They are typically way over zealous on ratings compared to other brands.

    A 4.8 gm is still loads better than the older this 350' and 305's. Those were dogs.
     
    Last edited: Jul 15, 2018
    Horkn, Jul 15, 2018
    #48950 Top
    savemoney, wildwest, brenndatomu and 5 others like this.
  11. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    29,167
    Likes Received:
    166,400
    Location:
    SE Wisconsin
    That's what 4 low should do. It works as intended.:yes:
     
    Horkn, Jul 15, 2018
    #48951 Top
    wildwest, brenndatomu, NortheastAl and 5 others like this.
  12. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,479
    Likes Received:
    54,102
    Location:
    Ovid
    I don’t buy anybody’s power ratings :rofl: :lol:

    I drive an e250 for work with a 4.6 talk about gutless after the parts and tools. :picard:I’ll give it one thing though it’s also a very reliable engine.
     
    Pallet Pete, Jul 15, 2018
    #48952 Top
    Horkn, wildwest, brenndatomu and 5 others like this.
  13. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,479
    Likes Received:
    54,102
    Location:
    Ovid
    The real shocker to me is the 2019 Silverado with a four-cylinder I couldn’t believe my eyes when I read that!
     
    Pallet Pete, Jul 15, 2018
    #48953 Top
    Horkn, wildwest, brenndatomu and 6 others like this.
  14. Woodwidow

    Woodwidow

    Joined:
    Oct 4, 2013
    Messages:
    15,501
    Likes Received:
    95,463
    Location:
    Port McNeill, BC Northern Vancouver Island
    Morning all. Beautiful day here as we are in a good weather stretch. Daughter and SIL are here to mow lawns, put wood down and make kindling. They spent the day yesterday at Granny's mowing lawns and doing yard work for her. campinspecter was able to walk around the block yesterday so recovery is going well. Staples in the leg are suppose to come out tomorrow. It will be easier for walking then.
     
    Woodwidow, Jul 15, 2018
    #48954 Top
    Horkn, Erik B, papadave and 14 others like this.
  15. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    24,545
    Likes Received:
    141,531
    Location:
    US
    We should hope so!!!
    So glad to read of campinspecter ’s great continuing recovery. :thumbs:
     
    Eric VW, Jul 15, 2018
    #48955 Top
    savemoney, Horkn, yooperdave and 11 others like this.
  16. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    48,977
    Likes Received:
    312,129
    Location:
    Central MI
    Yes!!!
     
    Backwoods Savage, Jul 15, 2018
    #48956 Top
    savemoney, Horkn, wildwest and 9 others like this.
  17. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,495
    Likes Received:
    104,020
    Location:
    St. Lawrence River Valley, NY
    France - 1. Croatia- 0
     
    Gasifier, Jul 15, 2018
    #48957 Top
    savemoney, wildwest, NortheastAl and 2 others like this.
  18. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,495
    Likes Received:
    104,020
    Location:
    St. Lawrence River Valley, NY
    All good to hear!:thumbs:
     
    Gasifier, Jul 15, 2018
    #48958 Top
    savemoney, Backwoods Savage, Horkn and 9 others like this.
  19. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,495
    Likes Received:
    104,020
    Location:
    St. Lawrence River Valley, NY
    France -1. Croatia-1
     
    Gasifier, Jul 15, 2018
    #48959 Top
    wildwest, NortheastAl, Chvymn99 and 1 other person like this.
  20. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,495
    Likes Received:
    104,020
    Location:
    St. Lawrence River Valley, NY
    France -2 Croatia-1
     
    Gasifier, Jul 15, 2018
    #48960 Top
    wildwest, NortheastAl, Chvymn99 and 2 others like this.
Page 2448 of 5429