In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Thoughts on Echo Chainsaws?

Discussion in 'Chainsaws and Power Equipment' started by yooperdave, Aug 31, 2022.

  1. huskihl

    huskihl

    Joined:
    Jan 30, 2016
    Messages:
    3,625
    Likes Received:
    20,624
    Location:
    Michigan
    Echo quality has been top notch on any that I’ve been into. They don’t always have the frills and ergo comforts of husky or stihl. But they’re dead nuts functional and reliable
     
    Horkn, JimBear, System and 14 others like this.
  2. Dok440

    Dok440

    Joined:
    Mar 7, 2021
    Messages:
    1,168
    Likes Received:
    8,045
    Location:
    NorCal
    I like Echo chainsaws but they are a little different. They are more like a pickup where the pro Stihl's and Husky's are like race cars. Echoes are slightly heavier, slightly detuned and built like a tank. They are also easy to work on with less plastic cladding. It would be interesting to have one ported and see what they are ultimately capable of.
     
  3. Eggshooterist

    Eggshooterist

    Joined:
    Dec 19, 2021
    Messages:
    6,122
    Likes Received:
    32,350
    Location:
    Erff
    All the echo products I have / had responded well to a muffler mod and removal of the carb limiters. They are pretty choked off out of the box. Even my hand held blower is muffler modded. I picked up just over a 1000 RPM at wide open throttle from that.
     
    Horkn, clemsonfor, huskihl and 3 others like this.
  4. jrider

    jrider

    Joined:
    Feb 12, 2018
    Messages:
    5,648
    Likes Received:
    38,697
    Location:
    NJ
    Have an echo 8000. I cut a lot of wood with frequent restarts. Pull strings were constantly breaking and had some issues with the recoil on the string. Somehow they built an 80 cc saw without a decompression switch. Cold starts in the winter were tough on the shoulder. Outside of that, the saw is a runner.
     
  5. Stephiedoll

    Stephiedoll

    Joined:
    Oct 8, 2013
    Messages:
    3,779
    Likes Received:
    26,814
    Location:
    Omaha, NE.
    Guessing you mean 2511t? What do you think you want for it if/when you sell it?
     
    clemsonfor and yooperdave like this.
  6. Screwloose

    Screwloose

    Joined:
    Jan 15, 2017
    Messages:
    5,291
    Likes Received:
    30,803
    Location:
    SE Wisconsin
    Never had any cord breaking issues but I agree it can be a beech when cold!
     
  7. Sawdust Man

    Sawdust Man

    Joined:
    Feb 3, 2022
    Messages:
    2,458
    Likes Received:
    16,743
    Location:
    65761
    Yes, it's a T.
    I'm thinking $360 shipped.
     
  8. The Wood Wolverine

    The Wood Wolverine

    Joined:
    Aug 23, 2015
    Messages:
    17,481
    Likes Received:
    109,938
    Location:
    Gettysburg, PA
    Or the power to weight ratio. Always heard they are heavier than the competition (per cc).
     
  9. huskihl

    huskihl

    Joined:
    Jan 30, 2016
    Messages:
    3,625
    Likes Received:
    20,624
    Location:
    Michigan
    I agree. They tend to try to make up for it with torque, rather than horsepower.
     
  10. Screwloose

    Screwloose

    Joined:
    Jan 15, 2017
    Messages:
    5,291
    Likes Received:
    30,803
    Location:
    SE Wisconsin
    They are definitely more ruggedly built than the competition and that's where the weight comes from. Have more of a old school feel to them.
     
  11. fox9988

    fox9988

    Joined:
    Oct 4, 2013
    Messages:
    2,709
    Likes Received:
    8,275
    Location:
    NW Arkansas 72717
    I've had a 35ish year old CS-510 for about 10 years. Good saw. Well built.
     
  12. jrider

    jrider

    Joined:
    Feb 12, 2018
    Messages:
    5,648
    Likes Received:
    38,697
    Location:
    NJ
    Was this the 8000?
     
    yooperdave and Screwloose like this.
  13. Jutt

    Jutt

    Joined:
    Sep 26, 2014
    Messages:
    180
    Likes Received:
    922
    Location:
    Bailey, CO
    I was in the Home Depot rental shop the other day scoping out the rental saws and they had 2 Echo 590 Timberwolfs as rental units. That particular saw isn’t the same caliber as the Dolmar/Makita 6400s HD used to rent out but I assume they must be pretty reliable.

    I’ve been seriously considering a CS-7310 for a 70ish cc saw to go along with my Jreds and Husky.
     
  14. Rickyblazin

    Rickyblazin

    Joined:
    Dec 6, 2021
    Messages:
    671
    Likes Received:
    4,341
    Location:
    Pottstown PA
    I like echos my buddy got the 410 model i think its called from home depot and we ripped up a huge ash tree no problems
     
  15. Locust Post

    Locust Post

    Joined:
    Oct 4, 2013
    Messages:
    8,679
    Likes Received:
    49,886
    Location:
    N. E. OH
    I was looking for something a little bigger and ended up buying an Echo 620p. I liked it well enough that I bought an Echo cs400 for a small limbing saw. Both have been good runners.
     
    yooperdave and Screwloose like this.
  16. Screwloose

    Screwloose

    Joined:
    Jan 15, 2017
    Messages:
    5,291
    Likes Received:
    30,803
    Location:
    SE Wisconsin
    Yes I have a 8000 and a 8000p and until recently a new 800 (got it at a steal and a friend wanted it). They all pull over hard. I start mine by pulling the rope slowly and when it goes over center pull like crazy, and hopefully it doesn't yank the handle through your fingers.
    Nephew (know it all) went to show me how to hold hold it in your crotch and yank. That was funny.
    Great saws, been complaining though about the air filters to myself since the 90's.
    If echo sold a bigger saw in the states I would not have bought the Stihl 661.
     
    RichE23ACR, jrider and yooperdave like this.
  17. Screwloose

    Screwloose

    Joined:
    Jan 15, 2017
    Messages:
    5,291
    Likes Received:
    30,803
    Location:
    SE Wisconsin
    I also have a 680 and it also has the manual override oiler.
    Love that saw.
     
    yooperdave likes this.
  18. isaaccarlson

    isaaccarlson

    Joined:
    Sep 29, 2014
    Messages:
    1,342
    Likes Received:
    7,499
    Location:
    Colfax, WI
    I have run a couple. A 590 and a 620, I think...could be wrong. They ran well and felt well built, but also felt very heavy. They had good power for off the shelf saws. I have stihl and husqvarna saws right now. The echo saws felt heavier than all of mine, which I didn't like because I got tired faster with echo.
     
  19. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,057
    Location:
    Ovid
    I’m late to the party as usual lol.

    I’ve got some time on the Echo lineup. The CS-352 and CS-590 probably have the most time put on them and they never fail aside from 1 plug and my own stupidity flooding the cs-352 a couple times. My CS-310 was the first saw I bought made by echo and I still have it. The little guy just keeps going. I don’t use it much anymore but it fires up every time.

    In terms of build quality they are made very well at a good price. They are often called box store or homeowner saws but that’s not true on either count. Echo has a dealership network like Stihl and husky do. The major difference is that they don’t carry the name sale power of other brands. We have a couple tree services that have been contracted to the city since we have lived here and they have used predominantly Echo for limbing and topping saws because they are light and powerful little saws.

    So far I have no complaints and they do what I ask of them. They may not have all the bells and whistles of other brands but they don’t need them either in my opinion.
     
  20. James Miller

    James Miller

    Joined:
    May 16, 2019
    Messages:
    562
    Likes Received:
    4,005
    Location:
    Hanover PA
    I run mostly echo saws. 355t, 4910, ported 590. Honestly it was a money thing for me. I went to get a 362 and my dealer said the 590 will run the same for $400 less. He was right and I've been an echo guy since. I've run all the modern stihls thanks to farmer steve and the weight savings would be great but I just can't afford them.
    My echos aren't the fastest or the lightest but they keep the gas man away at a price I can afford.