Newbie... Need Install Advice For Farenheit Endurance

I have been looking online and came across people using registers as takeoffs. If that's the case I could use them on top and stay up high with the 10" duct.

 

Finally was able to get some more work done over the weekend, ran the OAK.
Gonna insulate it when I get home so more pics to follow.

 

Assembled the return air duct trunk extension tonight. I have to seal the other side then insulate. To do this project right it does take time I noticed.

 

Moving along at a greater pace than me but I got my reasons, honeydoooooooweeee list

 

Oh I know all about it, lol, it might be ready for next winter lol.

 

For many of you, it's really a "honeydoNOW" list. I know one guy who runs to get them done before

 

Haha, I think I make my own to do list. With the holidays and family coming over, I like thinks to look great!

 

Look on the bright side...with all that hot air over the holidays, you won't need the pellet furnace those days at least!

 

Mine isn't on the honeydoNOW list. It's the ensuite washroom which I'm slowlllly putting together. Psst, slowly going on a year now

 

Finally got the duct insulated and installed the hanger straps, just have to install it now.

What surge protectors are you guys using? I wanna order one so I can fire it up when I am ready

 

Was able to seal up the vent kit with hi temp rtv. No it's not pretty but sure hope it's sealed from inside out.

Did you guys seal the T clean out
cap with sealant also? I didn't yet because I cant see how I'll be able to remove it for cleaning

 

I put a thin bead of silicone on the cap before I reinstall it, then cover the cap with foil tape. Easy to remove the tape and pop the cap off when cleaning.

 

http://www.amazon.com/Tripp-Lite-UL...=1416538062&sr=8-9&keywords=isobar+tripp+lite

 

Thanks guys, gonna order one now.

 

Got some more work done today, finished the vent, just have to add a bracket.


Also installed a 10' return section. I have another 4' to add.

 

Thanks!
10" takeoff collar? I have an extra one if you need it, let me know.

I see there is a back draft damper and regular manual damper. The backdraft damper looks like a butterfly type damper and is operated automatically with air pressure. Is it ok to use the manual damper?

 

Hope everyone had a great thanksgiving! I myself fried a great bird everyone enjoyed.
Friday I went back to it since I had to take a break from the furnace install. Made some more progress....I was able to mock up the heat duct. Now I have to seal and insulate, and use real hangers. I used weed wacker line in the mock up lol.

I emailed Farenheit and the engineer there said its ok to insulate with fiberglass silver back from the very start of the heat duct on the furnace.

Don't mind the mess in the background. Everything will be straight and clean.

Any tips, or constructive criticism is welcome.