Craigslist Thread

I could put a 30-inch split in my old stove.

 

I'll bet that bad boy is gone!

 

Sold it for $175

 

I don't know for sure, but this might take a 4 footer

 

Firewood Kiln & baskets - $20000 (Hudson Falls) hide this posting restore this posting
< image 4 of 5 >









Firewood Kiln/Heat Treating

Insulated Container Kiln we fabricated using lumber kiln components. This Kiln has a self loader inside the kiln that moves each basket from front to back, back to front. There are temperature probes for each of the (2 face cord ea.) 6 baskets. Drill a hole in the largest piece of firewood for each probe. Internal Temperature is chart recorded for USDA specifications. Control panel has digital read out of kiln temperature & relative humidity. Circulation fans have external single phase motors for thermal/chemical protection (wood moisture is extremely corrosive). Internal aluminum fan blades & shrouds move air in a circular motion. Kiln is heated with hot water boiler (not included). Hot water heat exchanger at 180 degree kiln temp heat treats in 4-5 days (4 cord load).
We're getting out of the firewood business. Don't have the time

If seriously interested Call! leave voice mail
If you don't have that kind of $, don't waste my time

All emails marked SPAM

Complete firewood kiln w/9 baskets $20K
Might consider trade for 35K gvw dump truck or Wood-Mizer bandmill (Nothing Else)
Processor not for sale

These prices are quite FIRM otherwise we're keeping it (it's less than half retail)
No Tours or tire kickers




Tags; Hardwood firewood, Seasoned firewood, kiln dried firewood, wood boiler, Logging, Skidder, sawmill, heat treated, heat seasoned, firewood logs, wood splitter, camp wood, bagged firewood, camping, kiln dried hardwood firewood

 

Wow that's cool

 

Jack Straw you know anything about this? It's out your way. I sent him an email this morning.

 

Log splitter, Super-split - $1200



condition: like new

This is a super split log splitter. It splits a log in 2.5 seconds. $1200.00 OBO works great call Courtney...

 

An hour east, halfway between home and where the GTG was.

 

Echo CS-5000 chainsaw

Echo CS-5000 chainsaw - $125 (Spokane, WA) hide this posting
image 1 of 6







Echo CS5000 chainsaw with 18" bar - chain sharpened.

Minimal use the last 5 years (second to a Stihl chainsaw).

$125 cash obo -- Been sitting for 18 months, so reduced price
No need to ask if still have the saw, if ad up then have.

 

I wish that I was closer.
Free wood

 

Homelite 20 in old school chain saw - $150 (N Hills)

 

I just went and picked up this monster!


Honda engine and pressure washer

 

Pioneer saw anyone?

Vintage Pioneer 620 Chainsaw

 

Or this 103 cc Mac s550.

Mcculloch S550 chainsaw

This one I even thought about. It's not horribly far away.

I heard it's kind of rare . I'm no Mac aficionado, but the old ones have a great reputation.

 

Stihl chainsaws (9) for sale
Stihl chainsaws (9) for sale (sw wa)

I am selling some saws that i have rebuilt and am getting out of the chainsaws so if you are looking for a good deal on a stihl this is likely as good as it will get.
there are 4 stihl ms660 and 066 chainsaws. most are powerheads only meaning there are no bars and chains. I think one of them has a 32" bar and chain on it. all are tagged with the repairs done. most of these have had all new main bearings, gaskets and seals with new top ends as well. some have new starters and clutch covers on them as well as new clutches and oil pumps. prices are 600.00 ea.
there are 2 stihl 044 chainsaws that are just rebuilt with new low end bearings, seals and gaskets as well as new top ends and whatever else they needed. there are no bars and chains included on these either. price is 450.00 each.
there is one 046 chainsaw that has been repaired with new piston and rings, seals and gaskets as well as new starter and air filter and cylinder cover. price is 450.00 on this one as well.
there is one ms310 with a new 20" bar and chain. has a new shortblock . looks and runs like new . Price on this one is 300.00.
there is one 038 magnum ll with a 24" bar and chain. has new low end bearings, seals and gaskets as well as top end..price on this one is 400.00. compares to a 460.
these saws have been gone through and had anything possible that was worn or broken repaired or replaced. they are all nice running saws. I have been doing this for over 40 years and am getting out of it all togather. i will be listing a lot of chainsaw repair tools that are specific to saws as soon as i sell the inventory i have. this is on a first come basis. i will not hold these saws and i will only accept cash. telephone is best. 360553 8017

 

Chainsaws , Homelite, craftsman, etc
Chainsaws , Homelite, craftsman, etc - $200 (Eatonville)
UP DATE this is what I have left from original listing most are parts saws.
I started cleaning out my barn and have Misc. chainsaws, plus a box misc. saw parts.
For now most are Homelite, Craftsman, Poulan, Mac's. Most will need carb work or fuel lines to get going. If you like to tinker on gas motors this is a great project deal for you, too make you money plus back. Buy one or all, $200.00 takes all. Part out on e-Bay. Taking offers. Parts or rebuild. NO Stihls in this listing. Roger 360-832-6644 NO CONTACT NUMBER NO REPLY! NO TEXT

 

Chainsaw - Stihl MS660 Magnum 36

Chainsaw - Stihl MS660 Magnum 36" - $800 (Lakewood)
Only used 4 times, like new! Originally $1,300. Price negotiable.

 

PRO-SAW - 64cc Chainsaw w/28 Bar
PRO-SAW - 64cc Chainsaw w/28" Bar (Eatonville)
For sale is a Makita model DCS6421 64cc/4.7 HP professional chainsaw with a 28" bar. This quality German made saw was built for Makita by Dolmar, a well respected saw manufacturer with decades of experience.
This saw is built for daily use by professionals with great features like: A durable stainless steel muffler, a compression release for easy starting, a sturdy metal handle, an adjustable rate chain oiler, felling dogs, and more...

From the manufacturer:

* Easy-starting automatic half throttle lock
* Chain compartment is easy to clean and clears chips away efficiently
* Slide out baffle can be configured for efficient cold weather operation
* Large metal spike bar for increased productivity
* Two-point durable inertia/mechanical chain brake
* Decompression valve reduces force required for starting
* High power-to-weight ratio: weighs only 13.9 lbs. (w/20" bar & chain)
* Maximum engine speed of 13,500 RPM
* Lateral chain tensioning for quick and convenient chain adjustment
* Advanced vibration dampening system engineered to reduce vibration

This saw is in much nicer condition than most of the over-priced, worn-out, pro-saws on the market...
... @ $450.00 it's one of the best pro-saw deals on C/L.

Call John @ 2.5.3 - 3.8.1 - 3.1.5.1

(Note: I don't respond to anonymous e-mails from low-ballers)