In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Homesteading Chicken Coop Build, Chickens, Pond, Garden & Projects

Discussion in 'Hobbies and Interests' started by Well Seasoned, Mar 25, 2018.

  1. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    Thanks! I don't have the metal yet only because I need to build the front roof still and after that put all of the 1x4 ferring strips down to put thr metal on.

    I'm still debating on the roofing, either cheaper galvanized stuff strictly for the roof that's there now and painted for the front, or all painted. The roofing is very expensive, so on materials.
     
    Flamestead, bogieb, Chvymn99 and 3 others like this.
  2. bogieb

    bogieb

    Joined:
    Mar 30, 2015
    Messages:
    11,768
    Likes Received:
    71,321
    Location:
    New Hampshire
    I hate when I put in a lot of work and you can't tell the difference just by looking
     
  3. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    I know! I'm ready to see progress!
     
  4. cnice_37

    cnice_37

    Joined:
    Oct 4, 2013
    Messages:
    3,205
    Likes Received:
    14,196
    Location:
    SE Mass
    It's looking good from my seat!
     
  5. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    17,245
    Likes Received:
    112,016
    Location:
    Vermont
    Well Seasoned have you priced polybicarobnate panels.. they are rated for roofing you can get them in colors although I like clear or soft smoke color and then you don't need a lot more lights in it I think they're about $20 a panel 3 ft wide length you need
     
    Midwinter, Chaz, bogieb and 1 other person like this.
  6. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    I'd like something a little more rigid, however, I may run a few sections in between the metal for light. I did use it on the chicken coop run and it's fantastic stuff.

    I got some pricing today from 3 suppliers, so I'll be doing some figures soon.

    The roof will be complete today, but im not likely getting to the front roof done today. I'm already running out of fuel. We'll see what lunch does for me. :)
     
    Midwinter, Chaz, bogieb and 2 others like this.
  7. JCMC

    JCMC

    Joined:
    Dec 15, 2014
    Messages:
    1,600
    Likes Received:
    10,111
    Location:
    Just outside of Shushan, NY
    Certainly looks like you been getting it done. I agree the metal with a few strips of the clear for light.
     
  8. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
  9. Midwinter

    Midwinter

    Joined:
    Aug 8, 2017
    Messages:
    19,846
    Likes Received:
    130,464
    Location:
    Nashua, NH
    *patent pending*
     
    Well Seasoned and Chaz like this.
  10. Midwinter

    Midwinter

    Joined:
    Aug 8, 2017
    Messages:
    19,846
    Likes Received:
    130,464
    Location:
    Nashua, NH
    How to fake an illness and escape the pan
     
    Well Seasoned likes this.
  11. Flamestead

    Flamestead

    Joined:
    Dec 7, 2013
    Messages:
    2,131
    Likes Received:
    10,742
    Location:
    Windsor County, VT
    I’ve been told to be wary of the different materials expanding/contracting at different rates, leading to eventual leaks around fasteners. This might be an old wives tale. ?
     
  12. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    Possible I suppose, maybe from mixing 2 different materials?
     
    bogieb, Chaz and Chazsbetterhalf like this.
  13. Chaz

    Chaz

    Joined:
    Jan 27, 2018
    Messages:
    8,655
    Likes Received:
    61,175
    Location:
    Southwestern NY
    While I do think that there will likely be a difference in the expansion/contraction rates between dissimilar materials, I don't think it's a "show-stopper".

    The screws that are used have rubber grommets, coupled with the fact that a slight bit of leakage, while possible, shouldn't hurt anything.

    Biggest issue I could see is the difference in shape.

    If your metal isn't corrugated/formed in the same fashion as the poly panels, then you'll have more issues with leakage.

    I've seen it done on some pole barns, but never stopped to ask questions of the owners.

    .02¢
     
  14. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    Good info..... not sure what I'm definitely doing yet. The sides and back won't be done by fall- money & time ya know. The metal will freeze & thaw and drip anyway. Important thing is out of the weather & sun.
     
  15. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    17,245
    Likes Received:
    112,016
    Location:
    Vermont
    Well Seasoned .. the plastic panels for skylights do okay. If you remember my remember my Horsebarn and I have six on it. The newer Plastics are of course better and you have to get the ones that match the same profile of your metal roof. The new ones survive the 85 mile an hour wind storm that cost me power for a month.
    The old ones started to leak after the F1 tornado that came through 2006.. reading this I really wonder about where I live:D..
    Also there are 10 of them underneath my upper deck over my wood deck. I did this so that when the snow rain came down the lower deck Stayed dry
     
    Chvymn99, Flamestead, bogieb and 6 others like this.
  16. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    Thanks! I'll likely go all metal. I need to get my order in by mid next week, which will get cut to the inch and delivered. Both owners and a co worker surprised me today saying that we'll cut out early and bang it out in a few hours on a Saturday in a couple weeks! Perfect!!:thumbs:

    Now..... I've got a ton of stuff to do until then!
     
  17. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    I got most of the front roof done late this afternoon. 2 more rafters to do, then bracing. It was so freaking hot!!


    20190719_190012.jpg



    Dawn is picking up an orpington rooster tomorrow after work since someone she knows has to many. He'll be about the same age as my girls, and his name is already Maui! :headbang:
     
    Last edited: Jul 19, 2019
  18. MikeInMa

    MikeInMa

    Joined:
    Dec 4, 2016
    Messages:
    13,055
    Likes Received:
    92,527
    Location:
    Southern Worcester county
    [QUOTE="Well Seasoned,

    Dawn is picking up an orpington rooster tomorrow after work since someone she knows has to many. He'll be about the same age as my girls, and his name is already Maui! :headbang:[/QUOTE]


    A rooster? What....did those that slept over at gtg, not get up early enough?:cool:
     
  19. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF

    A rooster? What....did those that slept over at gtg, not get up early enough?:cool:[/QUOTE]

    There's something about a crowing rooster that we miss. Plus, since your not here, we're having trouble getting up before sunup. :eek:

    :D
     
    Chvymn99, MikeInMa, Chaz and 3 others like this.
  20. DaveGunter

    DaveGunter

    Joined:
    Oct 5, 2013
    Messages:
    3,894
    Likes Received:
    22,930
    Location:
    Far Away Ranch, Meadowbrook Forest
    Moved about 20 FEL buckets of chips to this old skidder trail, this is the beginning of my trail system in the back 40. It is usually a muddy mess. The chips came from the tree clearing for the house.
    20190720_072238.jpg
    20190720_072324.jpg
    20190720_072418.jpg

    The beaver pond down at the stream this morning, got the Hounds a good 4 mile romp before things heated up today.
    20190718_063343.jpg
    20190718_063553.jpg