Adapter needed for 4" Duravent to 4" flex chimney liner tee?

Gentlemen;

I lined my masonry chimney with a 4" insulated flexible liner with a stainless 4'" tee at the thimble.

From the p68 I have run 4" Duravent to the thimble where the 4inch stainless tee is. I need an adapter too put this together. I bought the Duravent flex adapter, 4PVP-FTC to mate them together, but it is the same diameter as the the stainless tee, it will not go onto the stainless tee.

Does Duravent make an adapter to go onto 4" ?

Thank you

 

They do - Duravent makes both adapters: and increasers.

It is unclear if you need another adapter to mate the trim collar up -> to the existing stainless "T", or an increaser / adapter: a picture or two of the piping / current setup would help.

Catalogs - DuraVent

 

WWW.Ventingpipe.com

 

Thank you.
I called Duravent and the technician suggested adapter 4PVP-ADFF , which i ordered today.

Thanks again

 

Glad you got your answer as per your opening line, my (and several other members) advise was not solicited

 

I knew that was coming!

 

You know me too well

BTW gmbb - no I'm not offended, I just can't help myself from giving people chit