“Husqvarna vs. Sthil”.

I prefer the inboard clutch over the outboard (Stihl better than the Husqvarna), but to be honest with you, it really is not the reason I dislike my Husqvarna. It is a pain to put on chains and bars for sure, but it is only done once a week or so. I can put up with that.

 

It varies. Right now in Maine the only wood that is moving is hardwood, so for the last two years that is all I have cut. I cut a few loads of softwood logs but that is about it.

I have never operated TigerCat, nor do I think anyone in my family (or even extended family) has any. Not that we wouldn't, we own everything from TimberJack to John Deere, Caterpillar to Kumotsu, Volvo to Hitachi; pretty much what ever we can get a good deal on. When a person is talking the money it costs for these guys, a tiny bit of interest, or a better trade in can make a huge difference in overall ownership costs. It gets goofy though because just like Husqvarna and Jonsered come from the same factory, John Deere is in bed with Hitachi and french-kissing.

I bought one of my bulldozers based entirely on the owner's personality. It is true. The guy was well to do, has no kids or wife, and like me enjoys working on equipment instead of watching TV. His brother was a mechanic for one of the largest construction outfits on the East Coast, so I knew the bulldozer was fixed up right with no hastily made repairs.

One thing to keep in mind about me though, is that I am NOT a logger. I was, and do log, and even am a Certified Logging Professional, but I am a farmer who is just clearing forest into farmland.

 

If the brands are truly a toss-up, then I'd lean towards the power shop where you will be having any maintenance done. Of course, if you're the type that performs your own maint, then never mind.

I'd find a reputable shop, and go with whatever brand they sell and service.

My 2 coppers.



Sent from my SM-T280 using Tapatalk

 

Great info as always Stumper . Your like a plethora of knowledge!

 

Have you tried Dolmar? LodgedTree Inboard clutch, made in Germany, and uses your husky bars.

 

Had a Solo. Same thing. Or at least 9 years ago it was . I forget which # it was . it had the 79cc p+c.
The 2nd one was a pretty good saw for a while . The first one, the crank broke at 11 cord.
The problem as I previewed it was they made the main case too light weight. Especially around the bar studs. It would have been fine probably if I only ran short bars . but I couldn't take me running a 36" bar .
I don't pay pro saw prices to have a bar stud shatter the main case.

 

Great info Stumper.

Thanks for taking the time to dig it up.

Husqvarna vs Stihl and buying a chainsaw advice