Conversely, I can snuff the fire completely under any conditions by shutting the draft completely. It's one of the things I like most about this...
I would NOT worry about the screws. That said, Woodstock prides themselves on being available for these types of questions.
When you're running 2.5 all the time, where does your cat meter needle point? I know it's not supposed to matter but mine really pegs and I worry...
As above, just get a small pancake compressor. It will do everything you need plus be very portable, lightweight, cheaper, and take up less...
Just out the window eh?
I had a scratchy turning thermostat knob so I went in and applied the copper antiseize to the spring washers of the thermostat knob instead of my...
Your nc30 needs a convection deck | Firewood Hoarders Club Here's my thread for it. The blower I ordered is not the AC30, it is a similar design...
So you just bought 12" square slate tiles, sliced them up into strips, and set them on the wall with no grout gap? Awesome! It looks like only two...
You're right, burn hot all the time is cleaner than any other operation style in that non-cat. New fires, cold starts, are a large source of flue...
I don't buy it. A blower, unless super oversized, will not be able to steal enough heat from the firebox to quench secondary combustion....
Just a photo of a third deck on the NC30. Oh and with a ballsy blower added, this stove makes way more major mojo than no blower.
Low emissions and high efficiency are not always synonymous. My princess is the #2 most efficient stove in the world, last I checked, but is much...
Chesapeake? I had one for many years. What a nut.
I've bottomed out our hygrometers at 16% during the winter. I like it dry. If your meters show above 50% then you're done, the house is fine. Her...
Not really. The old VHF antennas needed to be wide and long (horizontal) to pick up the long wavelength of VHF frequencies. Kinda like a CB...
That's a hammer tacker. Very much needed for roofing tar or visqueen, Sheet goods where accuracy in unimportant. For precision jobs like...
The pro shot... was the deer stiff or is there something behind it propping it up. Something looks funny. It must have been a long time after the...
Cool! I assume you shoot them through the cage?
Here's the oak tube. Off the shelf duct.
It's an automotive product. Copper grease looking. Used on things like exhaust header bolts. Just ask for high temp antiseize. After a dozen fires...
