That's correct. What can? Special software for that model or just good old fashioned part swapping?
When my 261 was new, and stock, it did the same thing. Would idle for 15-30 seconds and then die. It got better with time and after sending it...
Unwind the spring tension very carefully when you pull it off. When there is no more tension, you should be able to pull it straight out without...
It's something that only happens under load, i.e. Pulling the rope with the pawls engaged to the flywheel. The holes the pawls sit in in the...
Is the 576 under warranty still?
Can't say as they have moved on to a new generation (Coyote) of engines. The 2004-2014? Trucks were notorious for the plugs seizing in the head...
All of the mod motors in those fords had that problem. The V10s were good for it too.
Kimberly, I've been trying to find the video that explains why this happens in Stihls but I haven't been successful. Basically the pawls and...
Those hour ratings are how long the mfg guarantees the engine to remain in compliance with the emissions standards it was designed to meet. While...
I should mention that when considering any GM truck from the 1999-2006 era, look for rusty brake/fuel lines and check the rocker panels and cab...
Yes! The 6.0 is a very reliable workhorse.:dex: Just don't expect much from it for gas mileage. Better than the big-blocks, but not by much....
If you like simple machines that are easy to troubleshoot and cheap to repair, stay way the hell away from diesel pickups. Anything "simple" will...
That's one thing about the gasification setups, burn time doesn't matter when you are extracting all the heat and storing it in a tank. Of course...
Get a couple wax gaskets. Not worth a 30 min drive in case it doesn't go smooth the first time. ;)
Good news for you is that they aren't rare. Another one will pop up.
These are great engines, but wait until you get to re-timing those balance shafts in the bottom end. Te-he! Tear it down and see where you are...
My understanding is that the main hinderance to the efficiency of this type of OWB is the water jacket and all the heat it pulls out of the...
I'd be all over that 925 .....
Considering the retailer, it's likely manufactured in Yulik Laungding Dong China somewhere. ;) :p McCulloch brand was being used by HOP...
Is that one week on the next off?
