Nothing looks particularly bad. Did you use a deep bed of RTV, drop the gasket into the RTV, and then put the door on the stove and close? This...
Brand new door gasket, puffs of paint on the face, two years old, very low price.... Hmm, I wonder what the story is. So weird that the door hinge...
You can't stretch the gasket at all. If anything, I tend to bunch it up a little and then just lay it in the mud. Trim to length at the very end....
As far as your title, I expect more. I expect a lifetime of zero rot or corrosion when I buy a stainless steel class A chimney. As in no...
My experience with Englander products is that you don't get what you pay for. You get much more. My bigger NC30 from Englander has been a solid...
That's the plan if I just really decide that the wood look is unacceptable. We like the woodiness but painting white would be much brighter.
Yikes, I used 8' t8 fixtures but I used and recommend the ones that are actually 4 -4' bulbs. The 8' bulbs are getting rare, expensive, and less...
Woops, I have this one. Englander Smoke-N-Sear 788 sq. in. Pellet Smoker and Grill-21-PG100 - The Home Depot There is a gap between the hopper...
I got a permit for my stove and a requirement was that the thing sat 18" off the ground. Something about gas fumes. It is pretty convenient to...
I'll try it! Sooner the better since I'm sure the OSB will be fading and under that sticker will be unfaded. Here's another progress shot of the...
So I love this thing. I store it outside under the very low and 2 foot deep eave of my house and roll it out for use. Before I bought it there...
Keep it cool enough so no parts glow and warm enough that smoke isn't visible. I suppose.
They're stuck on REALLY good and super thin. They would likely peel off like car tabs on a license plate, you know, shredded. Heat gun? I'm...
There's always a joint somewhere in that gasket and the gasket on my NC30 is in the middle of the hinge side looking all frayed like that too....
How did you get all the white stickers off of the OSB?
Careful with that. Only if the owner's manual specifies that a wall shield reduces the clearance requirements can you use that trick. The original...
I was so impressed with the consistency and durability of the condar flue probe meter after a decade of use that I bought a new cat probe meter...
We don't eat them of course but I have shot dozens of them. Regular old #8 shells into the moving mound. I've never seen a mole come above ground...
870 magnum of course. I don't like the taste of ducks and since my old Chesapeake is not alive anymore I shoot these guys now!
There is no hazard with insulation touching the junction box, wire, or anything else associated with this project. I think you may have read...
