Lucy installed a couple of windows this past week. [ATTACH]
serious bidders will wait until the last 30 seconds or less
under 16" diameter zero unless you are going to mill it personally
I have an email into Aarons company, will let you know if I get a response.
perfect for a street rod build, won't use much except the sheet metal. eBay fees are going to be high. I would go with CL first, find where Fords...
with the radiator under there it is more of a warming rack to me.....................
exactly all other states it is safe.
2-3 years before building........might have to find/build a kiln/dryer,
I do know a guy with a 36" belt sander he uses for cabinets, might be able to buy him some belts and get it smoothed.......
concrete with radiant heat, you will sleep on the floor in the barn rather than in the house in the bed..................
I would want to keep the width without gluing the boards together, kind of defeats the intent. I have lots of free time to hand plane and sand,...
I have thought of a use, possibly a dining room table, book matched. 5x8 maybe for the family gatherings. Now if I can get someone to mill it if...
I always used the 48 inch finish mower so it would look better, as long as their are no stumps logs to hit. If you keep mowing it with a finish...
I am having one cut down this upcoming week, any reason to save some of the trunk?? Probably about an 8 foot section with no limbs/knots.
not re-manufature just "fix" him
this, except the 4x4 for aesthetics, it took 100 years of abuse so far, so unless you are going to have some very aggressive extra curricular...
zip ties, duct tape and "drywall" screws what the world is made of.
Around here they call it 304, also have heard it referred to as berm material. The first couple of years after I built the house this is what I...
I was in town one day "flying" our colors and was confronted by one of the local Fuel Oil gang, he tried to intimidate me into switching to oil....
lets see who can open the most bottles at once [ATTACH]
