So in my head I'm trying to fix this problem, here goes my idea. The lenght of the damper rod is 6.5 inches fully pulled out. When the rod is...
Sounds good. Now it makes sense. I put the wood in it sizzles a little so I leave damper open about half way wait for about 10 mins gets to...
Alright I guess unseasoned wood must be the answer then. Thanks everybody.
So if that warped piece has a job what is it? Because all I see is a 90° piece of iron that has three crappy welds on it, is warped, and taking...
Oh the white spot on top of the stove that was a previous thermometer there. Then I decided to wipe it and it just smudged everywhere.
400° F start closing it.
Pretty sure that piece is there for decoration, I think I'll be angle grinding the remaining two welds off and pulling that off and out. People...
Warpage
Well the weld broke on the left side and the right side warped. Honestly no offense to anyone I love this stove and I hate this stove. It is so...
Okay 32 blocks 8" a block equals just over 21' of chimney just measured it.
There is a liner in it.
Here is some loaded
Secluded area. Glass lasts about a week of constant burning and then needs a cleaning only a light glaze on it, not like my old hearthstone (once...
The chimney flue is oblong 6"-7"
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Wow this site is fast. The pipe exits the stove with one piece of pipe up to a 90 then another piece of pipe to the cement wall where it exits...
Also the sides against the bricks look like they don't burn either.
I have a question about my NC 30. Why is it that it looks like only the front of the wood is burning and not the back? After a complete...
