Thats all I have for now. Let me know if your interested in more and Ill get them later on.
The wedges were not preheated. I use a Miller 200 Amp MIG with .045 wire. I made probably three passes on each side. After the first pass the...
Agreed - this machine sends unclamped wood flying. Thats the reason for the enclosure. I run it pretty carefully - when clamped the wood stays...
Here is a twist on the standard processor downtime.... [MEDIA]
I had some further testing on the processor this year. I ran a substantial load of mixed knotty maple though and found the rate of damage went...
The hydraulic pump was replaced with the same one 28 GPM but the cylinder was decreased from Ø5" to Ø4". It made a big difference in speed. The...
I finally was able to put together an update video. It is linked here: [MEDIA] Appreciate the interest and the comments! jmur1
I am now working on a sliding tray insert for the slab saw. I will have an update shortly. [ATTACH]
Agreed - however fairly limited by the hp with this design.
It is Creo or better known as Pro/E
Sorry I missed your other questions. It has two live rollers and a belt conveyor on the infeed line and a live (two beam) deck that feeds it.. I...
94Bullit: I have a smaller knife for finer splits but it doesnt work well for the bigger logs. I have left the big one on since it has proved its...
Hi Brenndatomu: Here are some pics. [ATTACH]
I made the original computer model over a period of 1-1/2 years back 2012-2013. Then the main build took around 2 1/2 years. But I am still...
15 hp combined direct drive saw with hydraulic splitter 6 additional powered operations for various log controls Hold to run with instant braking...