wood glue and a clamp that that board is as good as new.
Yes, I have seen these bundles at Lowe's.
Thanks for sharing, that looks great. I want to do something to the wall behind my stove. I have some ideas in my head and I am thinking I want...
I would suggest removing the heat shields and getting them out of the way; they will lighten the stove as well and you won't have to worry about...
Look in your stove at the firebrick. The two firebrick that are in the rear of the stove with the angle should be at the front; no gap in the...
Now that is something I need to look into. I get a lot of fly ash in the air even using the clean out plug and ash pan. I have a question...
Scroll back through the posts Warner posted a clearance chart for the stove. I may have read it wrong.
Yes. However, the shields don't cover the full sides of the stove; therefore, the minimal clearances has to be from the unshielded parts of the...
Yes, but there is a shield that covers part of the side; I certainly would keep distance from the unshielded part of the side. However, I can get...
Some on here appear to think I do. I thought that the side heat shields would be enough to give me safe distance. The stove's manual states 9...
OK, I understand. That is the best place for me to stack wood. So if I place an additional shield I should be OK since the stove has a partial...
I actually thought about that as well. However, the side shields don't go the full width of the sides. Plus, I don't have the space in front of...
I need to dig my manual out and see the clearances again, they are fairly low at the shields. I pulled the manual up online, the clearance from...
That is a good question. With good hardwood and stacked to the capacity I hope several days. Time will see and of course how hard one is driving...
Stove top currently 550F; wood beside stove 109 F.
Haven't seen any issue yet but I will keep it in mind.
:D:rofl: :lol:
Yes, been thinking about that as well; a wooden crate and I could just use a ratchet strap to hold the crate to the trolley when I need to bring...
The heat shields do a good job. The back side of the wall doesn't get hot even with the stove running continuously. I think the same will be for...
Maybe, I guess I will find out. I have stacked wood on both sides of the stove before without the racks, criss crossing the wood up level to the...
