yea, we only sell Harman OEM parts.....sometimes to our chagrin.....there is certainly a secondary market with non-OEM parts, I just would rather...
and then, it also costs money to unload the car, then hire a trucking outfit to rail it from the railyard to the pellet retailer....thats gonna...
You are correct! There are dealers who store them under cover, but covered storage isn't cheap (especially for a low profit margin commodity),...
Agreed.......maybe by the end of February you'll see folks dumping pellets, but its been a cooler winter so far, people seem to be burning more...
I am not familiar enough with that stove line to say how reliable their components are, or not. While I agree with the plethora of non-OEM parts...
just bad luck?
yea, $225 for Vermont is a pretty killer price.
well, its all based on our own experiences, I guess. Lets just say I've sold thousands of tons of each, have physically been on location in both...
I think I would put them a step below NEWPs.......just my impression on burning both. Blackstone is arguably more "green" as they use old pallets,...
after a cleaning, try throwing a handful of ash in the burnpot, see what happens
I wouldn't call it an earth-shattering price.....
not at all....mines 19 years, original ash door gasket, and Ive changed the Burn chamber gasket once. Original hopper gasket, original tailpipe...
When I clean, I scrape most everything down into the ash bin from above, in test mode....I prefer to clean a cold stove. After the scrapings done,...
maybe not, but the only reading that really matters is at the switch
You can upgrade it to the new type, yup. You show the actual kit in the last pic! Ive never had one fall apart....but agree, it wouldn't be a bad...
I keep a small tee with my draft meter, and a small section of 1/8" hose.....I take the reading at the vacuum switch usually, which is probably...
the barrel plunger one is the oldest, was problematic as sometimes the ball bearings would come out of the barrel, and then they dont work. Also,...
you want inches of pressure, not psi or mbar.....good reading differs......id say -.40 in or more.....don't forget, your vac sensor shuts your...
When youre troubleshooting a problem....no. When the stove is new and youre setting low draft, yea....and a cold stove as well!
could be my issue...I don't drink!
