Truer words have never been spoken. I’ve had to accept imperfection and live with the swirl marks from the automatic. I just don’t have the time...
I assume this is Echo’s answer to the Stihl MS150T
My guess would be that the fuel pressure is off-spec for whatever reason. Unless the ECU is actively monitoring the fuel pressure, it would be...
Oh I’m using the same equation as you Clem, no worries there! But the result is only as accurate as the inputs right? ;) You are assuming 400...
I wondered how long it would take the marketing folks to give engineering the green light to brink back HD gas guzzlers. $3.00 vs $1.89, Diesel...
The Lie-o-meter is usually closer than hand calculating assuming the fuel system is in good condition. Unless you have leaking injectors or your...
I don’t see ANY of the current V8 powered half-tons getting 20+ MPG in the real world at 70+. I’d be impressed if it made that on flat ground for...
Ten year old 3/4 ton with a 6.0/6.2(did it even exist then?)/6.4 gasser would do a fine job of moving that machine every blue moon.
[ATTACH] This was taken just before Christmas and was the case until about a week ago. We’re back up to about $1.89 on gas now.
ACK....HACK....COUGH....TIPMs....ER-HEM.... Go ahead and replace that fuel pump/headlight/horn/signal relay. Dare ya.... :whistle:
It was always about MPG. Just like the diesels of yesteryear. The old IDI’s and Detroit 6.2/6.5 engines were never meant to be the highway...
None! They’re like the Eeyore of diesel pickups! Ok then, off I go now..... :rofl: :lol:
Oh that 7.3 had her issues alright. You just didn’t know which one it was going to be and they didn’t cost $10k to fix!
Siri says 2hrs and 42 minutes, or 177 miles. Greenville is the closest dot on the map for us.
Maaaaaybeeeee.
These are only “necessary” to combat carb icing. That’s not even a real problem in real cold temps as carb icing really only happens just above...
Maybe you should drive it over to see OneLonleyFarmer. (YouTube) I hear he’s pretty good with tires! Side note: Tractor tires don’t usually...
The ad says that it’s an 038 Magnum, 72cc. It’s not badged that way (the 038 Mag never got the “Magnum” sticker, it was always on the name plate)...
$500 is pretty steep for a saw that’s every bit of 30 years old. Even if they were excellent saws for their time. Insult to injury however,...
Yeeeoooouch. :confused: