Out north and west cold and some places snowy, in the Midwest and East heat wave, going to be 90+ the next week, and dry as a bone. I'm ready for...
The cut on the side is to square up the tree and make it a little smaller, mostly a European thing. The cut in the crotch is a mistake I believe,...
Check the rim sprocket as well, could be causing premature where to the chains drive links. If you have to force the saw through the cut the chain...
My dealer flipped it when I bought mine, one screw, I bet some don't know any better.[emoji111]
The cat muffler is likely the cause. First thing I did with those saws is replace the muffler with a non cat version, I then open that one up...
The main issue will be sprocket tip life, in tough conditions the Tsumara tips are not very durable, for firewood duty they're fine and the rest...
If your depth gauges are not set correctly, or a little lower than normal, the chain won't noodle well. My guess this is part of the issue as...
Wood crushing has nothing to do with it IMHO, and to be honest doesn't make any sense, as you're cutting the fibers not compressing them. It all...
I have never noticed the teeth on the CHAIN getting dull noodling any faster than cross-cutting. My guess is the CHAIN is coming into contact with...
Sounds like she will run with a rebuilt fuel systems.[emoji106] I run at least 40:1 but 50:1 won't kill your saw. Best of luck with the saw.
A complete fuel system rebuild will be in order. At minimum a carb kit, fuel lines, fuel filter/pick up. After that you may have issues with...
No not properly. Just buy the simple file guide the fits to the file and a progressive depth gauge. This setup is just as easy and far superior as...
Tune it a little rich, don't make really long cuts without taking a break for the first few tanks of fuel. Other than the run it normally.
My 06 plastic deck Honda has been awesome, same with others I know that own them, it's the mower to get IMHO. And it stands up to rocks and sticks...
Rocky Mountain ATV/MC - Search Results for ratio rite
I run 32:1 in all my ported saws, 40:1 I fine as well. I have ran many different oils and Stihl ultra is one of the worst oils out ther when it...
Schaeffer Oil | Supreme 9000™ Full Synthetic 2-Cycle Racing Oil Although many have had really good luck with this oil and the 7000 in chainsaws,...
Had a chance to finely get a little time being one of these new hot rods. This saw already has a muffler mod and the timing advanced. So far I'm...
A couple from yesterday. The saws had oil and fuel no bar and chain. [IMG][IMG][IMG][IMG]
Good saw I liked mine just fine, the v2 is as light as any new 60cc saw. I personally skip 60cc saws and go straight to 70cc, especially if I...
