Concrete, I don't know when the next charity cut will be but I would be more than willing to show up the Friday before and/or the Sun after &...
I have several different hatchets & believe it or not, the $8 Harbor Freight is the one I take to the woods. Yellow fiberglass handle is easy to...
Hedge is the 36" bar to sell or loan?
That looks like one of Hedge's dye jobs.
Look like a good place to break in the new 32" bar you have ordered. Let the chips fly! :tree:
Splitter is homemade. It has gone through 4 phases of building & I still have a couple of things I want different. I will probably leave this on...
Hedge's line of stealth saws - as long as you don't start one up!
Wedges. If you had to fight a slight back lean & wedges just aren't doing it. I have on occasion used the wedge feature of my port-a-power....
Seems like I saw a couple of videos where you just use a ladder to cut it loose, or was that you straddled the horizontal part of the tree then...
I didn't realize how much of the sides of the photos would be cropped when being up loaded. In the future I will have to remember to leave more on...
Ok, here are some pictures. I realize I used a finger instead of a "thumb" nail. (I was trying to shade the camera.) The piles of logs while...
Man that's lot of work! I don't like to stack more than 7' high. For a short old man like me getting it back down is too much work. :-)
Hedge, please make sure you pass on the info for the next charity cut. I only has contact with Workshop thru AS. Thanks.
I'll try to get some pictures of the wood piles (several). Until I get a chance to get a house built, (hopefully next year now everyone is out of...
For the small amount of use you are anticipating & all the positive traits you listed for your potential partner. I would not have a problem with...
If you are planning on mounting the winch like it is in the "jag.jpg" photo, I would recommend you have a drop down support of some type to help...
Sometimes the lid/pointed cap of the gear bottles will screw onto your bar/chain oil jugs if you don't want to transfer the oil.
Sorry Dave, but a 4" cylinder with a 2,500 psi pressure relief as most log splitter valves are set & tie rod cylinders are rated, will only give...
Looking closer at the photo, I believe it is a cast aluminum muffler so my guess would be an S10. The boot for the spark plug is probably not...
Not an 07 but could be an 08, 08-s, or S10. (The S10 is sometimes referred to as an 510 but is an "S" not a "5" & cam in both a top handle & rear...
