I tore into a small Briggs in the early 90's to find a nylon camshaft. Yes it was toast and parts were stupid$$$ It went to the junk pile.
A friend of mine just mathed out an exhaust screen, his calculations came out to 30% blockage. Not quite the 40% we all strive for but...
[ATTACH]
Look into the flow dynamics of just the screen then add in chips, it is quite interesting how much a screen will impede air flow.
I have run into a couple of Elms that look just like that, both splits and bark. I have been known to noodle into manageable pieces.
Sent from my iPhone using Tapatalk I was going to say you needed a 395xp, but I see you made do with just 2 saws
I have had good luck with the Forester green and red bars. The green one on my 026 has at least a hundred cord on it and has just started to loose...
It happened too fast for anymore pictures. He broke the sound barrier when he tripped the trigger on that trebuchet.
I bought the same grinder two weeks ago. After the initial set up it takes about 3 minutes to switch between the different sizes and gauges of...
I have called him a few times and asked him for a part that is not listed on the website, and he had them. It's worth a call. On the IPL if the...
Some parts also fit from Husky and Poulan, but not all.
Call Scott @ chainsawr he doesn't always list everything on the site.
You spelled suckers wrong.
When you get it back together pull a vacuum and pressure check to make sure everything is good.
If the idle changes when tipped on it's side (usually a gain in RPM's) then one or both seals are leaking.
While it is warm, turn it on each side and see if the idle changes. If it does one of the crank seals is leaking.
