Vanguard is not your typical Briggs. I have seen them go 4-5000 hours on original long blocks. As good and often better than top-shelf Kawi or...
There has never been such a thing. All of their "entry-level" lawn tractors and zero-turns are Deere-built in Greeneville TN.
Through-bolting using a rubber pad is a plenty "good-enough" solution for compressors and other stationary equipment. Vibration will likely...
If you have to sit on it in the wood to get it to clean up, then yes, it's likely too rich. You want it clean and strong when cutting moderate loads.
Back in the early days (late '80s/90's) of UTV's, the Mule was the machine of choice for woods/trail use. 6x4 Gators were tanks and would...
That's right - they are Club Car vehicles under that orange paint. I'd forgotten that Husqvarna dipped their toes into the UTV market for a few...
Best to tune by ear, always. The tach is just objective information. It doesn't "know" how the engine is running. If you tune a stock saw and...
The 825 and the 855 were absolutely disruptive when they were released. Previously, the 6x4/4x2 and the T series machines were all work and very...
Not if you are forcing it back down to an RPM target with fuel. :dremel: If I had tuned by ear, I probably would have ended up around or just...
All depends on what it is you want the machine to do. The 6x4 and 4x2 rely on huge, floatation tires for their suspension. They generally ride...
Just a note of my own: That saw in the video ended up a tad rich afterwards due to it having a rather free-flowing muffler compared to the...
I was a dealer tech back 2003-2008ish. In a land far, far away. :whistle: Specialized in the compact tractors, gators, and municipal mowing...
Buying any kind of machine right now is expensive. Used or new. With Gators, the cosmetics are $$$ but that's most of what ever needs to be...
Welcome to the site JD Guy! Nice to see another upstate SC guy here. If you want to navigate our clay during the wet season, I'd prioritize a...
I was thinking of the "disposable" MS250's that were handed out like breath mints to ground crews. Most of them survived! :rofl: :lol:
Food for thought gentlemen. New saws are sold everyday to all kinds of operators. They go into service receiving no guarantee of proper care and...
I was also going to suggest a VFD with a single-phase input as an option but at aprox $300+, it's certainly not as cheap or as available (used...
It would be distinct as he hydro-dipped all the plastics so they had a carbon-fiber look to them.
".... from a better managed time ..." - sing it for us Geddy.... RIP Neil!
These things are a beast, and yes, they can be a workout - but so darn productive! [MEDIA]
