He did confirm both that he already has the Honda (unless I can't read, :picard:, happens! :thumbs:) and it's a 3-wire pump. 100% agree on...
The valve will not solve the inrush/startup current problem. But it will allow you to raise the pressure in the line to prevent the pump from...
Draining the line after each use is going to be a necessary evil for you. But it won't reduce the starting load on the pump at all. In fact, it...
My endorsement of trying it with the EG3500 is based on some personal experience of running deep-wells on generators during emergencies, a...
I agree with Stinny and the EG3500 should start that pump and run it just fine. 7.8a @ 230V = 1800w, and I doubt it will pull that for very long...
PS3 is the exact same cutter and tie-straps as PS, only the drive link is different and that's really only in play as the chain travels around the...
But why?! What is the use case for 40k behind an F450? Someone sat in a Zoom/Teams call and said this makes sense..... We'll sell a bunch......
I have, I'm not sure I'd bring myself to do it for a high-performance saw, but I've seen plenty of equipment do fine on it. I like Sabre at 50:1,...
Just use extreme caution if she breaks out the StableMates or worse, ShearMasters. :hair: :rofl: :lol:
What, you want them to fit, last more than a year, AND not leak? Jeez...... :loco: :crazy:;)
Some hoses are going to be a necessity. I don't think I've ever seen a kit with hardlines.
Four-wheel wagon backing is a right of passage for many a farm-kid. I'll admit, I was anxious when moving some equipment around at my...
Belts/chains are pretty simple to setup and far more forgiving of alignment imperfection than a direct-drive. Find a bigger pump to run slower...
Semi-skip is a great way to utilize high HP saws while still realizing the benefit of a skip pattern in big wood. Chip clogging doesn't occur...
Has to be a crew/mega-cab with a short bed too...... :sherlock: Lot's of newish 1T Dually Diesels running around here, with lift kits that make...
They do, but the price tag doesn't matter (to them) because 2 months before the next model comes out, they will put the phone up on FB...
I wouldn't consider that unreasonable at all for a build-to-order vehicle. Takes me a LOT longer than 6 weeks to talk myself into replacing a...
A quick way to sort linkage/governor issues on a surging engine, is to hold the throttle still, then move it slowly. If it runs fine from idle on...
Sounds like you got a junk carb. What was wrong with the original? The hunting is a lean condition while the carb is on the idle circuit for...
I would keep it in the summer setting unless you start experiencing carb icing. You'll know when/if you do!
