Pallet, looking good! :thumbs: Next add the out-feed tables & you will be saying, "Man I should have done this a long, long time ago!" :axe:
Loon, since your avatar doesn't give a clue where you are located, best answer is try to stack it in as sunny & windy location you have. Use...
Are you kidding? These folks are trained to spot a loose chain at a hundred paces! Nice job! I use a 2 wheel dolly/hand truck to move larger...
HoneyFuzz, your comment on the "Wild Things" vibrating your hands definitely would describe mine! One of the reasons it is a loaner saw - that &...
You would think so but I haven't never see videos of them doing anything but evergreens.
As with any saw the the bar mounting studs imbedded in the plastic of the casing, be careful of over tightening the nuts. I have one sitting in a...
Wonder how it would do with trees with lots of stiff branches like oaks with the dead downward hanging branches or Hedge trees?
Log lifts are great but not if you have to stand on it to run the splitter. I use mine to stage rounds to split all the time. There is no way...
There is a video of this brand of splitter, Tempest, where there is a secondary boxed wedge which turns the splits into 1.5" diameter sticks of...
What a nice compliment!
Key with any thorny tree is to use a long bar & shave the thorns off with the top of the bar to where the thorns are thrown away from you. I do a...
Mike the way your tongue is now, you may have a challenge with the adjustable wedge. There are a lot of good videos on YouTube for welding. If...
8 loops of .404 .063 for 25" bar 12 loops of .404 .063 for 17" bar These are Stihl RSLF (Rapid Super L Square Ground Skip Tooth) 6 loops of 3/8"...
And for the price of a big screened TV you can get a pro-grade saw which will make/save you money over the long haul in addition to the fun method...
Mike you have a good start. To go a few steps further: - Change the wedge from the cylinder to be fixed to the beam. This would be a great time...
I can understand the cutting itch. I have a big pile of logs & a 20' trailer loaded to process but don't have the time. I'm hoping to do enough...
I have enough cut/split/piled around I will still be several years ahead. Some is 5-7 years old down to 2 years old. It is all well enough...
I have rollers I use in the shop. If you used a piece of plywood with rounded edges for a sled you will be able to better spread out the weight &...
The beam looks like it might be on the low side. Easy enough to fix, pull it up on car ramps & block up the front support. Or depending on how it...
A handy idea. If you drilled holes to run a length of 3/4" pipe to use for a handle, it would be easier to grab & for me better alignment for my...
