A good cleaning can never really hurt..... A 12 year old motor and impeller? Yes, probably on its way out. Fans get noisier and noisier, then quit...
Is that bad boy UL listed? Does it meet 2020 EPA exhaust criterion? No? I guess you might give it a pass due to the fact its cheap and on Amazon,...
ugh......cant believe I am saying this, but I agree with Badbob on this one. Thirteen years really isnt that old....my glorious HarmAn P61 is 22...
I am not allowed by HarmAn to advertise prices online and risk the wrath of the marketing people. I can tell you that an Absolute43 should cost...
This is actually a good point.......above all, follow the manufacturer's recommendations! We too often speak in generalities here, not knowing...
Also, beware of putting the vent too close to the ground. Leaves, blowing near the pipe, are combustible. Drifting snow can blow an intake or...
I believe Harman doesn't come up because one of the primary criterion that the folks who do reviews consider is price. Very true that Harmans will...
it would work with 4" pipe, but might look "odd"......fireplace and stove. That said, theres other things to consider with an insert.....is the...
TLDR (sorry, busy time of year)....not a fan of punching holes through a functioning fireplace to bring in outside air. You basically ruin any...
Dont hate us cuz you aint us.....
hmmm...another thing to check.....does the slide plate had a dam of fines riding on top of it causing diminished pellet flow after startup? The...
thats a D revision board......good price as well. There should be a dipswitch setting diagram in the box with the board, use THAT diagram to set...
possibly clogged air wash by glass.....do you use the logset? It makes it worse. Other than that, the Advance is hands down the unit with seems to...
good advice from Snowy Rivers, but to get the true correct settings, you need to know the circuitboard REVISION. Look at the label on the board...
it probably can take either one, you just have to change switch settings if you change colors of ESP
I bet member Snowy Rivers can crush this!
I just replaced the harness cannibalized from an old stove. Can you strip a wire and solder it in place?
......are there any other pellet stoves other than Harman?.......
Ive no idea why someone might put a timer on the auger..... The triac being shot will normally not be evident on visually inspecting the board,...
same-o
