Good to know however I wonder if it was really only used with the new motor for one season. That bearing shouldn't be rattling like that. (Unless...
Yeah, that may be a job in the Fall. Unless never seize was used on the impeller, I be cuttin' the shaft mon.
Ok, I do have a needle oiler but not sure if the needle is small enough. What I may do is use a jewlers screwdriver to make a gap in the seal and...
It certainly looks like the bearing can be removed but I'm guessing it wouldn't slide right off. I do have a small puller that would pull it off...
Because I am used to the Baby and the constant maintenance it required, I decided to give the Accentra a quick cleaning during the last warm...
Good to know. I've yet to lower the stove to #2. Last night in room temp auto it only cycled a couple of times. Very little pellet use. House was...
It was in Room temp auto last night and I'll do it agin tonight. Used way fewer pellets and the house was still warm in the morning. Heck, it was...
When I installed my Baby back in 2007 I used DV. Not one leak from that day until I pulled the stove 2 weeks ago. I put a smear of high temp...
I played around quite a bit during the cold temps. I let it rip wide open for an hour or so and it darned near cooked me out of the room. With the...
I'll play with the stove in Stove Temp mode when it gets a bit colder. The way my house is laid out, to get the heat to the back, the hot air has...
We got 1/2 inch of snow, then the temps rose to almost 40 and it turned to rain. Later, the temp dropped again with a bit more snow and everything...
So much different from my Baby!
I agree in part. Even though the fan is off, my digital temp readout is showing 260 degrees just inside the discharge grate. The stove is hot! You...
Thought I would drop in and give a quick update on the Accentra. First and foremost, I am used to setting the heat (feed) level of the stove and...
Yup! It's about time something went right (Oooooo shouldn't have said that!). The color is cool. It looks black in low light but really pops...
Yup, read that in the manual. It's on 4 and staying there :)
My wife's been away for a week. She just came home today, just in time to see the stove job completed. I was worried she wouldn't like the green...
I did hear that they will burn anything but.....
:rofl: :lol::thumbs:
Spent most of the day working on the stove install, but I had to go out on a ladder to mess with the exhaust venting and I got a bit wet. Had to...
