I'm down for a little Covert Chanukah giving.
HoneyFuzz since you have a 40cc Husqvarna, and a 60cc Echo, I think it would be best to keep your future three saw plan eclectic, and add a Dolmar...
Agreed, on all counts. I was thinking about the ideal 2 Series three saw plan.......242.....262.....288...
Well, the way I figure it is there is an ergonomic convenience, or ability to a top handle saw, that a rear handle saw just can't do. Just as a...
Very nice looking saw. I've heard that those are great little limbers.
Hmm? A 24" bar on a 60cc Saw for bucking 20"+ timber? That is a pretty good set up for knot bumping, and limbing on downed trees. Which is why...
Meh? Semi maybe, but it has been my experience, and is solely my opinion that full skip isn't really necessary on anything under 28". I run 24"...
Bump
Edit: The saw started in the middle of the cardboard sheet, as evidenced by the bar oil. However, the basso profundo rumble of the exhaust caused...
[ATTACH] This came to Utah today, via FedEx. I made a trade deal with Keith Walsh for the power head. I modified the Carlton bar to a 14mm slot.
I always check the oil in my saws before I use them........:whistle:
Yep, an Oregon D196(Windsor UXL) would be correct. The nice thing about those is that with an S clip they can be used on saws that normally run a...
Bad run of bearings, or bad QC checks on a run of bar assemby? The laminations could be off.
From what you have described, I believe you are correct. A "normal" lock up on the tip would come free by trying to roll it in a piece of wood. If...
[ATTACH] dusky here are the two variations that I own currently. I usually run 12 and 14" on these. At 33cc's I find those bar lengths to be optimal.
dusky You can get a little A/K041 in 12" should be 45 dl in 3/8 lo pro.
Hahaha! Except for the ones that aren't.
Gary, Which mount is the Oregon three rivet in the middle?
I can see your line of reasoning in your previous post. However the 0xx to MS xxx happened a quite a bit after the 031 era.
[ATTACH] New pricing. You stay classy, FHC.
