[ATTACH] [ATTACH] [ATTACH] [ATTACH] Just bought this PM 700 ( the one on the right ) . The one with the mac bar is one I picked up a couple of...
Something to be aware of if you order chaps online as opposed to in a shop where you can try the fit. The length is from the top of the chaps ,...
Mr. Ralph , As someone else said ... check the solenoid . Next time I'm down at the dealer , I'm ordering one just to have as a spare .But ,...
You might try calling C. Reiber and Son in New Castle ,Pa . I got a clutch drum for a CP 45 there a few years ago . They were an Alpina dealer...
I think the 10 * is manufacturer specific . Oregon calls for it onLGX,LPX ,etc . . IIRC they call for 0* on semi chisel . Stihl calls for 30/60/0...
I round grind ( USG) ,and file (roller guides ) at 0 degrees . Never noticed any great difference in cutting speed .
Actually , it was a very good question . There are a lot of folks that run their chains way past needing a touch up . It doesn't just make cutting...
If You are cutting rounds ,and the saw won't self feed ,to me the chain is dull . If you are "dawging in " the saw blocking rounds , then I...
How is your carb set ? We've had a recent change to much colder temps . Probably the same where you are . If your carb was set close to lean in...
Definately get a good file guide ,and sharpening set . Learning to properly sharpen a chain is both rewarding and cost effective . If your old...
Woodland pro ( carlton ) semi chisel is good and inexpensive if you catch a sale and cheap shipping at Bailey's .
Not a direct comparison ,kinda apples to oranges . But my 346xp (oe) wearing a 3/16 chain was as fast ,or faster than my 562 wearing 3/8 in...
Prayers and good wishes sent for a speedy and complete recovery ......
If you aren't comfortable with doing those extra chains ,and think that a local shop will butcher them ( highly likely from personal experience )...
Horizontal only ( american cls 25hh ) . The log lift makes it so much nicer to get the job done.
I'm partial to the honda gx engines . Having said that ,my BIL put a predator 6.5 hp engine on his splitter a bit over 3 years ago . I finally...
Got a call from my daughter last night . She was selected for promotion to Master Sargeant . Makes an old man proud !
Your dealer is abusing you if you're paying that . You can buy them all day long for < $14 (oem Husqvarna ) .
My ms 460 ,and 661 do that . Gonna swap them out with decomps from husqvarna . Could be internet hearsay ,but I've read several times from pretty...
As stated above , Canola oil works . Other vegetable based oil may work , but will oxidize and turn to glue on the saw . I use a mix of about...
