Wow!
You would notice the difference between your Echo and a 372 in bigger wood. The 372xp is a solid saw on a great design. I’m not a huge fan of...
Wrenched on a few today- Went through an 034super that’s been used a ton. Cleaned up the air filter and dialed it back in to 13000 after. Had...
Wiggle that crankshaft and look closely at the bearing once you have the seal out.
Had a crappy pic the Mennonite kid sent of the 1128 failure. [ATTACH]
I figured you’d respond with that. Listen, I was a fan of them... until I went back into saws that had ‘em and found multiple failures (tears away...
They’re a bit like when AM fuel lines first became available. Lots of guys tried them. A few failed right away, but some didn’t. Eventually, most...
I was of the same opinion until we’ve been having failures. They are not good and will ultimately rip/fail.
Yes, check the AVs. The air filter cover gap can indicate problems with alignment. Sometimes removing a bent handle will straighten things up...
I take the clutch drum off, too. Clean everything back there and inspect the brake band.
Easy to fix, yep. Look for used OEM handle and brake flag. AM handles are prone to bending. AM brake flags are ok for 1122 and 1125 series, but...
Yes, it’s a “when.” There’s some hope coming from anecdotal evidence of resistant trees, but the odds of mature ash trees making it through this...
If there’s enough real estate and it’s not too oval, you can retap to m6. I typically timesert these holes in both Stihls and Huskies at the...
That’s the one I have had for a few years now (7?). I like it but it isn’t perfect. The display jumps around a bit during use, the battery is...
That AM fuel filter is questionable. Proline is slightly higher end since they appear to check quality control and brand the better AM products. I...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Those posts have to handle a lot of force when using the 4-way. On mine, the base plate where it attaches to the beam was slightly bent when I...
Great stove from a great company... congrats!
Although Dirko smells similar to conventional RTV (acetic acid/vinegar when curing), it definitely is not the same. It’s a proprietary sealant...
On your Xtorq conversions, what carb have you been using? I’ve built up one XT to OE so far... I used the XT carb. OE intake boot (rotated),...
