I am a move as rounds guy unless the rounds are too big to lift. Then they get popped in half or quartered. Splitting happens when I have some...
I like your style. Just make the stick the length you want the wood cut. I worked with an old timer who would go down the log from left to right...
Mingo is all about production. The best thing about it is that you can literally run down the log while marking it. I don’t think that you would...
Personally, I like a quieter compressor. My portable ones are Makita. I have the twin stack Mac2400 in the garage and it keeps up alright with...
I feel the pain. I have been hoarding older cans and also putting aftermarket spouts on some new ones. Another trick is to add a vent hole. I...
That is a good deal if it runs well. I would buy it if it was in my neck of the woods. My 361 is my most used saw by far.
I really like my Hearthstone Mansfield. I got it very lightly used 13 years ago. It came out of the basement of a house that was being moved. It...
[ATTACH] [ATTACH] We sure did. That tree went one full cord. I had the mutt with me for the first load then I grabbed my son after school to help...
No full wrap, but 3/4 wrap comes on the R version. It also comes with larger dawgs and a bigger clutch cover. They probably sell more 3/4 wraps...
They make weld on grab hooks that have a thicker edge and no hole for clevis pin. I have seen them at the parts and rigging store. A 3/8 grab hook...
I ordinarily don’t use the decomp, but the 500 has pretty stiff compression. I was concerned that the starter rope was getting abused. I read...
I have a 28” on it. I doubt that I will ever run shorter. I plan to get a 32 and/or 36 too. The 361 wears a 24 except when we go camping. I put on...
Thankfully I only had to drive 15 miles for that load. The dead ones get grabbed up pretty quick. It’s the best firewood around here in my...
I am only a little over 4 tanks through mine and it did something strange yesterday. I warmed up the saw and limbed a decent blow down larch. Then...
Round here we call that a farmer cut. Pretty dangerous and unpredictable. They likely haven’t been taught properly and might not care to learn.
[ATTACH] I have the 3/4 wrap that is part of the R package. I wouldn’t want to cut on steep ground without it. It allows so many more good hand...
What size bar mount does it run? I wonder if it would pull a 32” chain? Might have to modify the oiler. It would be handy for one handed cutting...
This is good advice. Rods are reasonably cheap. This is a great “farm” welder. We call them buzzboxes. Run a few beads and you will see what I...
Am I counting 9 axles under the load? Plus the tag axle and the steering tires. Do you know how much weight it was? We have load restrictions on...
It is nimble for a 5 cube saw!
