Well...maybe...but sitting here thinking about it I'd be a tall task. I guess you could cut out the stainless V, make a titanium V, then make L...
Yes, but how would you adhere the titanium to the rest of the pot? I ask because it can't be welded...and that part of the pot is under stress...
Well...I've run mine for 8 hard years...6 ton/yr and overall it's a solid design. Still running my original control board, distribution blower &...
Yup...been saying all along...1/8 is not enough...thus the move to 1/4...tired of fixing those damm things!!!!
Well the pusher & door face were replaced with the thicker material only...so not really that much of a weight difference. I believe the...
I think the original pot is SS...just way too thin IMHO. I've had to learn to fab/weld just to keep my furnace running. Not fun having a failure...
I built the entire pot and Door/Pusher faces with 1/4" SS...The Door/Pusher were in service all last year (6 tons = zero wear). Currently...
So...it's the top right and the solution from the man himself (Mark Graham) is to drill & tap...as it's a stud welded on the backside. I'm adding...
Gents - it's been awhile since I last posted but was hopeful someone has come across my issue and has a solution. One of my pot frame mounting...
Great...thx!
Where's the ignitor filter...I know I've never cleaned mine!!!
Well...I oiled the auger shaft on install...so should be good...yes the bushing sleeve is considerably thicker than the stocker...the new one is...
Ok...So I installed the new bushing: 1st pic shows the old bushing, the new bushing and the step drill I used to widen the mounting plate. The...
ok...good to know...once burning season is over we can re-connect and see what we can do. Was at Don's last night and I'm going to cost him a...
So I yanked my auger last night so that I could replace the brass bushing (which, after seven+ years of running was wasted)...now I know others...
Don will hook me up with a Gleason auger motor Wednesday (I live a few towns over)... Dex - Do the 2 halves need to be separate for disassembly?...
That arm & pusher look brand new!
Dex...I have templates for that pot type (mine is same)...but I really needed a pot frame to tinker with to fit the thicker burn pot I made... If...
Hey guys...auger chit the bed...can someone suggest a good replacement? I replaced original 2 years ago...original went 5+ years...thinking 2...
