This one sure moves. I wonder how hot the oil gets??? 3M views | Reel by Čuture i mašine
We finally got some room cleared for more pallets and started splitting more wood. This stuff has been sitting for a few years and has some...
I try not to work in the wind. Adds more risk than there already is.
I melted a steel fireplace liner with dry poplar when I was a kid. It started to sag and I pushed it back up with the poker while dousing the...
We use doug fir for FAST heat.
I picked up my (hardly used) 372 for $600. The guy had it sitting under his work bench and wanted it gone. I took a log with to test run it and...
Great saws. I love mine. I need to get my ported 350 going again because the 372 wears me out when using as a full time saw.
I just eyeball it and they come out pretty dang close.
I was just talking with my wife about how many rounds I have cut in my life and how many pieces of firewood I have made. She guessed millions,...
Forks are soooo handy! I picked up 2 pairs of like new forks and made my own carriage. I have a bobcat 610, and the forks really add to the...
Ported saws are quite a bit faster than stock. It depends on the saw, chain, wood, and user, but 25%+ would be a fair ballpark. Some get a lot...
The tires I have seen from china have things spelled wrong, so it could be pis, spi. Sip, etc… I put full size tires on mine. Pretty sure they...
Our wood system is upside down now that we have the bobcat. We are figuring out better ways to store and move wood and areas are changing. We...
I think we need to go over some wood hoarding rules here. All I have seen in the pictures are a few rounds tossed in the bed. The rules of wood...
Also, make sure it is full.
I would stick with atf. Aw32 is thicker and may not flow well enough.
As mentioned, I converted my gas splitter to electric. I have no plans to go back to gas. . I used a 3hp 240v motor. I have a 100 ft cord on it...
It is amazing how well these filters flow with thinner fluid like atf, especially when warm. Mine shows less than 1psi of restriction at 11 gpm...
What is the micron rating?
I seriously considered a foot control for a while. Once I started actually messing with it, I realized that it was very redundant and more of a...
