There is no setup time needed with the Stihl 2n1 or Pfred cs-x file systems. Mark a starting tooth then sharpen away. The angle on the handles...
It can start of innocently: - First you need a saw. - Then a back-up. - Well maybe a larger or smaller saw would be handy. - Then the...
I have a Stihl 2n1/ Pferd CS-X file as well. Note they are specific to the size of chain you will be sharpening: .404, 3/8", and 3/8"...
A lot of work & cost to move to different job sites.
Charty/Benefit cuts/GTGs = GREAT time! Willing workers with great attitudes! What more can I say.
Awol & I measured the pile under the elevator as 26' wide at the base & 16' high. But this was only one of the piles.
My little HF grinder is the same way. I just eye ball it. Rarely use it any more now that I have gotten the hang of hand filing & minimal...
Gasifier/Jack Straw, take a look at this thread on my log bucking trailer. It may be what you are talking about. You cut standing upright, the...
As mentioned: - Pallets - Standing dead. However, even though the bark is falling off, on some trees anything larger than 4-5" in diameter will...
Pallets like those converted to crates are great for stacking the firewood in. My tractor has no problems with moving crates of wood around.
Stephie, you are definitely no slouch. When are you going to get an out feed table on your splitter? It will sure save your back.
I understand there are different models for different chain sizes. You might double check you have the right one for your chain size if you feel...
From the first post, it does sound like he plans to continuously scrounge for wood so he will be better prepared for next year. It makes it...
Cedar can smell nice to some but for others it can irritate the sinuses. Some are also allergic to cedar so if you have neighbors close by & have...
Both of my shop chimney's rest on the ground & have black stove pipe connecting them to the stove. There are angle iron supports going from the...
Scott, an old grain truck. Have one I will be doing later this winter/spring. Change out the axles, cut & bend the front part of the frame for...
Mike, I used a mobile home axle - $50 & get the tires on wheels for $35 each. 14 ply, 14.5 - 8 tires are the standard ones used now a days. Very...
The end of Razo's poker is how I made mine. Again it works great.
If you are looking for a basic horizontal/vertical splitter, I agree you can not buy the parts to build one for the around $1,000 you can catch...
My shop stoves have an ash tray below the grating so removing the ash is simple. For me the easiest way to separate the ash from the coals & to...
