Then we built a custom wood top out of 6/4 Alder to finish it off... [ATTACH] [ATTACH]
I then glued and nailed 1/4" plywood on the front and back of the unit (the front had my layout on it, before I sanded it). I drilled one hole in...
Built this for a customer, and thought you all might like to see how I did it. First, I did a mockup/layout in the cabinet. [ATTACH] I used the...
:D Good idea. [ATTACH]
Just checked. It is maybe 1/32" longer than the wide nose.
No problem at all to run the same chain on any of the three different bars.
I'll look at them again to be sure.
They are very close to the same length. I took this pic with the bar slots lined up exactly... [ATTACH]
That is correct. Wide nose ES...[ATTACH] Standard ES... [ATTACH] 'Low kickback' E bar...[ATTACH]
These are both 20" ES...[ATTACH] The top one is about 1/4" wider. [ATTACH]
I believe the ES bars have a wider nose than the E bars. The wide nose ES are much wider than the standard ES bars. They don't make the wide nose...
No.
The wide nose is noticeably wider. Most ES bars are narrow nose, but maybe not as narrow as the E bars? The wider nose bars are more prone to kick...
I have a 20" ES wide nose. It came on my 064 when I bought it. It's the one on the far left...[ATTACH]
Thats what I said. :p
There's a nice ported 2153 on AS. It's about $300 over your budget, though.
Over 9 oz. lighter that a 20" ES...[ATTACH]
The E bars are lighter and cheaper than the ES bars.
Details?
What would you be willing to pay for one of the elusive 'Jonsered' branded Total bars? [ATTACH]
