badbob beat me to it! Thx
You might have a hard time separating the impeller off the motor shaft. Buy a extra impeller in case you have to cut the old one off. You can try...
It could be the exhaust motor on it's way out! If you can, touch the rear of the exhaust motor to verify it's the culprit (be cautious doing...
Unplug it and manually light the stove. Bad enough to spend on a new board leave alone also a igniter :picard:Here's your chance for the updated...
Time to put your soldering skills to the test.....:whistle:
Thank you everyone for the BD wishes :D Went to a local college for a valentine dinner :cheers::chef: It was a awesome 5 course meal :thumbs:
Calling for -28*F tonight :dancer: wind chill of -44*F :dennis: We Canadian's love to talk about the weather :D bogieb stay home to work and whine...
You seen that too :yes:
Was it the Gleason/Avery motor or another Fasco?
Been busy with Reno's since before Xmas and I'm at this point.....
Whatever you do, don't try to mess with the spring action on it! When you have to readjust the temp settings, hold on to the round wheel where the...
January 57 bags & lost track on corn, little usage or premixed :picard:
Happy retirement Harman Lover 007 :cheers: Keep busy & hydrated :seasoned: :coldone:
So will be the mermaids :D
Scary HOT I would say :eek: You'll need a fenced perimeter around that beast :smoke: What are you burning and at what warp speed do you have your...
WTF :faint:
I don't do the number thing like you do :D From your calculation chart, it doesn't sound right o_O Time to allow the unit to fully warm up is key,...
Thank you for the warm words :D Sitting here waiting for the chit to arrive so I could start a partial clean up. It will be too cold for the roof...
What's up here is -9*F and 6" for tomorrow and followed with 4" Sunday morning which I have to drive 2hrs plus out of town for my only sister's...
For a CB that increases efficiency is something to consider if fuel savings for many years offset the cost of the board :cool: The more you burn,...