After 14 min I finally had to light it with the burn gel and torch. I’m burning stove chows right now so idk
Also like I stated I just replaced the igniter and it’s been about 10 min and I still have no flame. That 10 min is from the time I plugged the...
I also noticed this today while I was changing the igniter. Looks like it’s cracked between some of the holes.
That’s what I plan on doing. The Harman has more space in between the fins and it seems to be longer. If it’s longer then it will cover more of...
Wonder if this could be part of problem. The top is a new Harman oem igniter and the bottom is a used kwik fire that I had when I bought the one...
I replaced them door gaskets like last year, this igniter is maybe 2 years old but it’s not a Harman it’s a kwik fire. I actually made an...
well guys I’m just curious if there is a way to tell if your burn pot gasket is bad. I always clean my stove very well when I do but for some...
Guy near me had northern warmth supreme Douglas firs for 385 a ton and the northern warmth Douglas firs for 375. It sucks being over here. Hell...
I don’t think it effected my draft per say, I think I had to many pellets feeding into the pot and it was taking longer to light and that’s where...
I just looked in my owners manual. It says the low draft setting comes from the factory in the mid point (12’o clock) position. I wonder if it’s...
So that would be all the way up wouldn’t it?
Ok. I know stock it’s set straight up at 12’o clock. I’m going to try and see if I can do the draft test this weekend
Idk it seems like since I now have the dips set at off,off, on for the first 3 it lights really fast and has a much better flame to start out....
I also have my feed rate at like just over 4 and my ash is about 1 1/2 from the edge of the pot. Should I turn up the feed rate or leave it? The...
Now since I turned it to -20 seconds feeding its lighting like a champ. Lights within like 3 min. The pellets are up almost even with the down...
The only thing I messed with on the dip switch was the amount of pellets adding into the pot at start up. I don’t have a air intake (well...
The 1st 3 switched regulate your pellets. What ever combination of on and off will adjust your pellets. I had it set to default according to the...
I think if I remember right it was feeding to many pellets and filling the burn pot before it had a chance to light with any pellet I used.
The old igniter I had I check and it was at 62 ohms which is like 230 Watts. The kwik fire I bought last year was 310 watt so I’m wondering if...
