Lenny, Curious now that you've had the pcw3000 for a while what your opinion is. I'm researching these currently. I only burn for me personally...
I appreciate the ideas. I'm glad it's not just me. I've been struggling cutting these. Have been considering the stihl pressure washer, this may...
I appreciate the input. I'll give that a try. Thanks
I have a question, I'm cutting dirty wood that were previously used to hold bridge mats. They are square or rectangular and mainly oak. I am using...
I only ask as I spoke to Woodstock today. They recommend that according to the phone call. The instruction manual never even mentions a bath. The...
Hey, A couple combustor questions for my progress hybrid. This forum has always been such a help. I have 2 combustors. I switch them out every...
My house is small, maybe 1400 feet, two story as well so a rectangle. Not trying to push air to a far back corner on a ranch or anything. My air...
This morning worked better with that and I neglected to open my damper on the rear of the stove. I don't have an ash pan on my unit, regretfully I...
Backwoods, I will try that. I recall Woodstock saying to never open the draft fully, maybe that's why I never have. When it gets real cold. Like...
Roughly 26 foot outside wall chimney. 8 inch oval liner, not insulated. I appreciate you trying to help me.
Hello, I'm ready to be beat up here. I'm not new to the stove or the forum but I read considerably more than post. I'm a follower from the old...
I appreciate the advice here, that's why I asked. I am not though against spending money on something that has value. That's why I came and asked...
We'll I thank everyone for their opinions and will pass. I appreciate all the responses. I will just keep checking craigslist as I normally do....
Sorry, the wood supposedly is in lengths of 18-24 inches. With the maximum length for the progress being 22 inches I don't think many will need...
Hey, a question for you guys and girls. I don't typically buy wood but I saw this today on craigslist and was curious as to opinions on this? I...
First off I am a new member and I value all the things I have learned here. I have all the wood I need for this season from scrounging but have...
