I’d pull the loose ones out, one at a time, loctite and re install just snug to a little more than snug. Then pull the back two, one at a time and...
My favorite stock saw! Mark I did have the off idle bog issue that was fixed by the change to the AT-12 carb. I think it was the AT-7 that had...
Aunt Carrie’s Corner table, lobster roll and a Gansett Point Judith RI
Take 5 minutes with a T27, screw driver, scrench, hex, etc and give everything a check for tightness. I’d suspect muffler too.
Checkout the AV also. Those are soft have seen them degraded. check AV’s too. Soft and degraded. I’ve had unexpected throttle movement because...
not necessarily Aside from gasket and diaphragm, replace the needle, pull welsh plugs and clean all ports as best you can with carb cleaner and...
Same condition, XP.
[ATTACH]
[ATTACH] Likely first domino
Husqvarna 350 Air Leaks Decomp Valve and Seals https://youtube.com/shorts/lCWk_YSQH60?feature=share
1
Bump! Happy Mothers Day!
i saw one on CL in VT for $50 last weekend Looked great shape. Would have been a steal! I was too late
[ATTACH] [ATTACH] Been ready to hang the second set of doors for a while. Probably lose up shop this weekend. After pulling the jewel weed.
[ATTACH] From the second slowest build ever, 357XP got a new piston this afternoon.
you do nice job on the body clean up What is that you used to get over shoulder so the seal didn’t roll? I like the window on pasta boxes. Real...
I got this saw without a filter with it
[ATTACH] [ATTACH] [ATTACH] Poking at 357XP rebuild HDA 199 choked with dust. I see a lot of this
[ATTACH] [ATTACH] Checking to see how this Sachs Dolmar 133 Super might clean up. I’m not optimistic the rest of the cover will follow the...