I go back and forth on this because it's a little more difficult to wrap the bottom unless I start with setting the pallet down on the plastic...
I css'd some of the red oak that I brought home 2 weekends ago and even though it was dead and down the amount of moisture in it today was...
I was just going to say how nice it was stacking my 17" pieces on the pallet today after cutting 102" logs down on the saw buck. Now I feel just...
I couldn't stand it any longer (not because of the temp mind you) so I started a fire in the Myriad last night Oldspark style, or log cabin style...
I plan on wrapping all of the red oak some of you may have seen in my other threads in plastic, either shrink wrap or just 4-6 mil clear, UA...
Or you could just have a friend that hasn't cut firewood for a while come over and help! That's my method and it seems to work for producing a...
Welcome. Sounds like you'll fit in real well here! Feel free to post pictures of your wood production tools. 2-300 cords a year is something for sure!
No fire in either stove last night or this morning. Looks like I'll be going 24hrs without one. House is 68 right now but will warm up quickly...
I'm not certain that I consider a lack of oil ports "better" but I get your drift. I'd rather they had them and didn't need them than not even...
I can't find an oil hole anywhere on the blower for my Daka. Do all of your guys' have specific oil holes or are you pulling the motor itself...
I kinda thought so too. The inside is all cast iron of course and the cabinethas porcelain covered cast "mouldings" with heavy sheet steel that...
I don't HD. Can't find a tag or stamp anywhere on it! It's out in the horse barn so the chances of it getting dusty again are 110%!!
I rescued this great old stove years ago and it sat in a shed down at the farm. When we moved I just couldn't scrap it so it ended up in a shed up...
This one has well over 300k miles on it so I'm going to try and get by with just putting the camber adjustment bolts back in the exact same spots....
Makes sense to me and I've thought about that too but for my purposes I like the wedge moving. Eventually this splitter will be remade into a...
Pressing a wheel bearing (out and then back in of course) on the rear suspension of an old audi a4. Earlier this winter when I did the other side...
I've contemplated this myself Eric. My other splitter is the same type that you have and I would really like to have the 4-way on it. I'd like to...
Can anyone tell what I've got going here? [ATTACH] [ATTACH]
Here we go Eric. Pretty straight forward I had the side plates bent a few inches back from the front, welded them together and then put on a piece...
I've never had the smoldering problem and it sounds like you're doing everything right. Did you happen to look at the primary and secondary air...
