Something else to keep in mind. Yes the heat will rush up there and the cold air will fall. The problem is when you open the stove door the...
Throw it in there and don't look back. You can tweak things as you go.
It's all about internal temperature. The cat burns at 500 degrees. The secondaries light around 1000 degrees. So if you choke it down so the...
Here is some from my move in day.
Are any of you guys tipping the andirons front to avoid smoke spillage on reloading? I was going through old blogs on woodstock's site. I found...
Is it an external chimney? It sounds like you need an insulated liner. Once that is installed you could try adding pipe to raise the total...
What kind of chimney system do you have going to the basement? Before you have somebody start blowing insulation in, take a careful look if the...
[MEDIA] Here is another top loader for you to consider
I would look into something else. There are a lot better options out there for a quality woodstove.
I believe heat is the answer and lots of it. I worked in automotive and am currently a diesel tech in the ag industry. I've seen quite a few...
First pic.
I actually see it from a totally different perspective. Here you have a company that goes out of their way to keep customers informed as to their...
I very rarely run this stove on a high burn. 95% of the time it is cruising pretty low. Last night I was tired and didn't feel like wearing a...
When you get a good roaring top down fire, does anybody throw the cat in early? I usually do, but it's hard to tell how effective it is.
Do you have negative pressure issues in your basement? Maybe some stack effect going on?
Standard height allows you 2" to go up. Atleast mine was set that way.
So, yesterday I did a good cleaning to the stove and chimney. Here are my thoughts. 1. I took A LOT of ash out of it. There was easily 2 ash...
Interesting. I wonder if that will affect the heat distribution to the stovetop...
I also considered dropping it off at a local fabrication shop and letting them reinvent the wheel :whistle:
I thought about a piece of angle iron in the front there too. I'm just not sure if the angle iron would hold up to turning bright red. It might...
