I beg to differ...most people in FHC would pay extra if there was a tree laying in the side yard! :saw::stack::stack::stacker:...
Tailgateitus has probably spread to the canoodler valve...
Yup, looks like you got the ole choocher choochin! :thumbs:
You should be able to pull the float/needle/seat without pulling the carb...you may have to pull the engine side up on a ramp, then lay on some...
Bingo!
Ok, so that works out to a 3.5" x 20" with a 2.36" diameter ram. Which gives you a 4.8 second cycle time with a 16 gpm pump. And IF its set at...
Well, you know as well as I do that the math ain't mathin on a lot of their models...sounds like that's not always the case though.
These splitters look like yet another option built by YTL. (Chinese manufacturer of most big box/farm store splitters, and are known for fudging...
Hay is almost totally animal feed (critters of all kinds) its just a matter of if its made into silage, or further dried and baled (silage, which...
Down here, I'd lay odds that quite a bit more hay goes for silage than corn, but there is lots of that too.
That turned out great...nice job! :handshake: Going back to your original thought of burning it into metal...maybe print the prayer on paper and...
Have any scales around? My F250 Superduty would have some good squat going with a load of oak half that size...
I'm half tempted to grab a used FV to try n run on low like that in the basement during the spring n fall shoulder season just to keep the...
Entirely different process. The hay is cut, but not left to dry as much as when baling it, then it's chopped up finely and blown into that wagon...