I was in town in the car, 1997 Olds 88, when I stumbled across some Somerset pellets. I promptly bought 25 bags and crammed them into the...
I took my Non AE Mt Vernon apart a while back and I had pic of all the wiring for it on my phone for re-assembly. That phone got destroyed and I...
[ATTACH] Good idea . I'll start with that. Maybe it will help control the ash of these SIH pellets. They have caked up my stove already, just...
Yes I saw your thread on the holes. I did something similar just below the ignitor hole. I put four there. There was a lot of carbon on the...
Ahhh steam cleaning...there's an idea. I have one of those shark steam cleaners I use to clean up diesel engines with. That might eve work...
I put a few more holes in that burn pot, we'll see what happens. Man this stove lights fast. 75 seconds from the moment I turned it on. I thought...
[ATTACH] Got her done! Had to get some frequencies in it with the Dremel vibratory tool (had to peel it out of the ole ladies fingers). Lotsa...
well I've got about 80% of it off but tho last bit is super hard and wont budge. Might have to heat it and quench in some water to pop it off. I'm...
Flat prybar seems to work pretty good on the carbon buildup. What kind of grease do you guys use? I think I have some high temp anti seize...
ok got it out. Too much carbon build up to allow for enough movement to take it out. Had to chip off alot of that carbon first then popped it out....
[ATTACH] [ATTACH] [ATTACH] [ATTACH] and everyone likes pics so here is one of the carbon build up after one week of burning Somersets.
OK I looked on the other site and found a post saying turn agitator 1/3 of a revolution and slide left. That still isn't working. Maybe I need a...
I shut her down today. The agitation noise was, well.....agitating! I unhinged the lever and the outer pot came off easy enough. How does the...
Ok thanks, I'll scratch that off the old troubleshooting list. I was unable to bring the mag gauge home to use, so I'll check around some local...
Well I'm still conscious, well semi maybe. The only numbers on the circut board I could see were DHC-4100-b. There was a big sticker on a part...
ok good to know. I'll take a hard look at it when I get home. Thanks.
hmmm....dunno. I'll have to have a gander when I get home tonight. I sure hope so. That would clear up alot of questions.
Will do. We have a mag at work i'll see if I can use, doubtful but worth a shot. Yes I have read a lot of your old posts and have a fairly good...
Ok I've had it running on 3 and the trim on 3 for a while now and I'm only getting 200* out of the heat exchanger. It would be interesting to know...
The trim is all the way down. It was wud open and throwing pellets in the ashpan so I just ran it all the way down. I'll bump her up to 3. It'll...
