This is the box ,etc.. I pretty much try to have the things I may need on hand in that box. Nothing worse than being in the woods and needing...
Whatever plastic that the stickers are made from will not absorb Rit dye . So, you just put the part in the solution decals and all . You do need...
I have a plastic tool box much like the one Buzz Saw Brad has . It has a few tools ,wedges , first aid kit ,and zip lock bags with extra chain for...
If the CS 590 weighs 17 pounds , it sure doesn’t feel like it . It’s definitely heavier than my 562 , but I would not have guessed it weigh as...
I really like my 562 . But , if I was looking to replace a 455 , I’d go t o the CS 590 . I maintain 4 of them for various folks . They do beat...
I’m really happy with my 572 . It wears a 28” bar pretty much exclusively . It definitely has more torque than a 372 .
Try this place , they are great to work with . Log Splitter Valves | Hydraulic Valves | Hydraulics | www.surpluscenter.com
This may be a long shot . But if it’s going 15 minutes before acting up , it may be something that takes time to heat soak like the coil .
Also, while you are inspecting the items mentioned in the above posts , take a look at your drive sprocket . That tends to be a commonly...
Compressed air for the most part . If it’s really nasty ,old mix will cut through most built up grease . For pine resin , I have found isopropyl...
Try a grade 5 bolt . A grade 8 has more tensile strength . But , as mentioned above they are more brittle and don’t resist shear as well as some...
If you aren’t real warm and fuzzy about drilling and extracting that , drop by a machine shop ,and see what they can do for you .
Here’s where I got mine . www.diamondwheelinc.com
They’re actually easier and more forgiving than stone wheels . No shaping , a little occasional inspection and cleaning . They generate less heat...
you’ll find that the CBN wheel is way more accepting of dirt on chain than a stone wheel . So, cleaning can be as little as just “airing off “...
For the money , Champion gensets are hard to beat .Also ,have a look at NorthernTools . They make some relatively reasonably priced Honda powered...
This takes a bit of reading , but it’s got some decent info . It does have a part that explains the difference between just setting the rakers at...
The L14-30 is 120-240 v 30 amp capable . The L5-30 is 120 v 30 amp only . So, if you plan on running anything that is 220-240 v , you need the...
Solo 681 .
If you were closer ,you could drop it by here ,and I’d sort it for you . Maybe check into USPS flat rate prices . If it’s cost effective to you ,...
