Horkn: about a half mile west. East of the airport. I have land on both sides of the river and there's four bends on my property. Were really...
Yes the Milwaukee usually don't get more than a month safe of ice. Also got some dry downed ash.
[ATTACH] [ATTACH] Finaly got the old four wheeler fixed broke for a year no pics so it never happened. Went cutting today! The river froze over so...
I went back and looked at the stock one it has a heat shield they both have baffles which I drilled out. The stock one has an extra chamber by the...
Finally installed the new Chinese muffler kinda like a beer can. Thin, still I had to drill out the inner baffle. Had to adjust both the low and...
I agree with that! I would rather burn boxelder than lose all my ash. All my elm trees grow to about six inches then die. Its easy to cut not...
I used to pick my ash trees two years ahead girdle them a year in advance with the chain saw then cut split and stack a year ahead. Now i'm...
Hey neighbor I bought it from a guy from New York in a divorce sale. Saved a couple grand but I have no warranty. So I have to treat it right. My...
That's what I was thinking also I'm thinking of installing a zone valve in line with the pump to prevent heating the tank when the house is...
How did you plumb your storage? Like the Oct 25 post? If so any negative wear on the pump running water through the pump backwords? I was...
My boiler is open so I wouldn't have much pressure. I would use 3/8 or 1/2 inch steel plate because I would need to install legs so I could...
I found a1000 gal propane tank for $425 80 miles from me. If I can fit it in the door i'll cut it in half weld plates on the ends and stand them...
I work for an HVAC company and have been looking for a good takeout. By the time I hear about it the guys have cut them up and scrapped them. Alot...
Almost a month now I'm definitely using about 1/2 the wood of my natural draft smoke Dragon. But I need to clean it at least once a week. I mean a...
I keep mine at 150° spring and fall 170° in winter I have a diverting valve piped to my furnace coil. I keep my furnace fan on all heating season...
I'm still running conduit for lights and power. Everything is on cords and still have a little mess going in the boiler room. Work keeps getting...
I have a natural gas furnace with a 200,000 btu heat exchanger and auto change over. With 250' Rahu pex to the house and 150' to my shop. I also...
Got the gasser going tonight 175° burning ash 42° and windy outside. Voted then went for tacos and beer 170° and still full of wood when we came...
Sorry about the extra pics still learning attaching files and previewing.
In the crate until this year. I installed it in my milk house. Along with a heat exchanger then connected it to my smoke Dragon and installed 3...
