Yes Stihl can and should sell to everyone, yes they should also have dealers that know how to get people into the proper product but if your...
He will like the saw no doubt but the chain brake still won’t work with the drum not installed and it will still pack with fine dust under certain...
Looking at his photos I know it’s a bigger homeowner/farm & ranch saw not 100% on model but guessing the 251 because of the single bar stud. Also...
Didn’t realize you tried to use something not completely assembled that’s why the part was not positioned properly. That same design a has worked...
glad you like it most people don’t test operation of a system without all the parts kinda like seeing if your cars stops without rotors. I’m...
No idea how your link between the coil spring and brake band could get like that should be a stop if I remember right. That piece between the two...
Try the method i mentioned above to set the carb, but yes lots of the Chinese carbs are junk or it could already have an air leak somewhere in the...
If the idle is that touchy sounds like the L “low jet” is a touch fat. Since the 066/660 is an old school style saw how I would go about setting...
If your cutting firewood to sell and or huge amounts for yourself or logging you should be buying a pro saw for sure, the echo you have will hold...
Did you check spark? Those cheap China coils dir quite often. Everyone always asks me why I’d buy a used oem saw vs a clone. Think your beginning...
The dewalt ones seem decent from what I’ve seen, where my wife works sells a ton of them and the chainsaws also.
I’m assuming the grinder gets pulled to the front edge when in use? I tried to mount mine back like that once and if the chain wasn’t hanging it...
It’s been awhile since I worked on that 346 but if I recall I left the actual cintered metal vent in tank and it was just a bare line that went...
I believe husky thought better later on the idea of a line to air box, i changed one I worked on because I hot days the tank would pressurize...
Depends where your shipping to and from but if it’s with the upper Midwest like parts of Up Michigan to North Dakota ect speedy delivery is cheap...
So what are you putting on it for a top end? You said original cylinder was still good but you’re replacing it? Just wondering why and what your...
Should be tons of used ones lying around since it’s the same as a 350
This is all due to centering the vice, the back jaw of chain vice needs to be set for your gauge of chain so the tooth is on the same part of...
I know you’re not talking about a Stihl your pretty much anything but Stihl and I know that and obviously I’m pretty much all Stihl but do have a...
You mean the new to be out next year ms400.1 that’s 10 oz lighter than current 400 has more torque and basically the same hp as current one plus...
