I like scrounging stuff at work. Lots of stuff that is fixable gets thrown out and lots of stuff gets left behind on jobs and gets covered in ten...
30 here, we are the Oregon Trail Generation. There are several new demographical studies out stating there is a small population that sits between...
Have a 576xp-AT and currently reviving a 395. To see much difference between the two I had to step the 395 up to a 36" bar spinning an 8tooth...
Jen and I had sous-vide then char grilled new York strip with grill baked potato and sauted asparagus with a tamarack fire crackling in the Optima.
Given your requirements and the small selection of saws I have experience with I would suggest the 576xp.
Way too nice of a night to be inside. So I puttered a bit with the three point hitch on the farmall m. I got the tabs welded in that will hold the...
I've been bucked off several times. Last couple months haven't rode much. I do miss it. Life has been too busy. I may give up street riding.
Chemistry- I was always a fan of Zn + HCl. One experiment called for filling a small test tube, sticking in a match and listening for a 'pop'. I...
KD8NSD here. Haven't done much with it. Checked into a repeater net a couple times. Looking at getting 2m/70cm & 10m setup in my jeep. Would be...
Got home from work yesterday and cut some pine. Loaded up the trailer then went inside. Decided to fire up the Optima for real. Had the sitting...
Yup, in the very north region. Basically north of duluth up into the Boundary Waters Canoe Area Pseudo-Wilderness. Our flavor is Larix laricina....
Little to warm for my liking to stack wood or work the saw buck. Swamp is too wet this year to skid out last season's left overs, those will have...
Make sure you bring him a little something-something. Home made pie, some venison chops if you hunt, fresh filets if you fish, something to let...
Two hydraulic lift cylinders and a hydraulic top link. Tractor only puts out 800 psi at best, looking at 4" cylinder with stroke TBD. Also...
I am building a three point hitch for a farmall M. Should I build to category 1 or category 2 specifications? I imagine cat 2 would be...
I found with mine I really didn't gain much over a 75cc saw until I went with an 8 tooth sprocket. Keep in mind though I mostly cut soft woods. If...
Fiarwood! Lotsa fiarwood. [IMG] Usually not a problem getting back there with the wheeler. Want a really good freeze before I try taking the...
I'd really like another low snow year with enough cold to really freeze the swamp up.
Can't hurt might help. If you are worried about the caw hitting chain, use an industrial ratchet strap.
Yup tube is better than angle, most don't seem to want to spring for the extra cost.
