I have a Leyden purchased in 2008. Great stove. Still on original igniter and ran it for 6 straight seasons on thermostat as sole heat source....
I use lint eater with 4" brush 25' up works great. Also use on drier vent....
Guess I missed that - Thanks for the answer!
524530030 is a MWP UPC.
I have always purchased from my dealer because Travis did not allow selling stove parts on the internet outside of a dealer service area - or...
In 2008 I bought the pellet stove because oil was up at ~$4/gal and it was way cheaper to heat with pellets. Best price around me now is $259/ton...
I agree with the T-shirt. :thumbs:
I have these. Never had huge issues with Green Supreme but these put out loads of ash and very little heat. Have to crank the stove up on high to...
"200 CFM Blower Included" Well, that is nice to include that....!:doh:
About 1/2 bag :thumbs:
Fixed.... Works as it did in October 2008. Thanks!
Great thanks man! I'm putting it back together Saturday. One more - Should I scrape off all the old red RTV from the stove where the plate...
Anyone know if it's ok to put a few drops of 3-in-one oil on each end of the auger before I put it back together with a new bottom bushing plate?
Pretty corroded inside the brass bushing, I could barely move the auger by hand. [ATTACH] Wet stuff PB Blaster I used to free it up to get auger out.
Thanks - A picture's worth a 1000 words, ;)!
Thanks!
Got it all apart, Hardest was the lower bushing plate. The brass bushing was pretty corroded and bound up. I cleaned it up and will save as a...
Anyone burning this years TSC MWP (their older red bags not the new white ones). I picked up 2 tons in August, iGepir told me bar code was Maine...
Ok gents - After 8 years the Leyden Auger is making some serious groaning noise. Reading through some "old" posts from the other site...
No! didn't get kicked out - just don't go there much anymore. Started back there to check pellet pricing reports and didn't recognize too many...
