Thanks, I will try to remember to post some more on it.
I’m still learning, and I don’t do a lot of saws, but they are fun to transform into wood eating machines.
Thanks! These things run pretty darn good after the treatment. The vibration of a 372xp never bothers me, but I can definitely tell that the 365...
Doing another Husky 365 Special. Will post more pics when I’m done with it.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Agreed....that being said, I still wouldn't burn Jack Pine in my stove unless it was the last thing left. I don't have any of it down by me, but...
Lol, you’re in luck. It just sold.
Local sale pending
If you really want to know where your ignition timing is at, you gotta use something like a dial back timing light. You would also need to mark...
FWIW, here is a ported MS400 with 10 degrees of timing advance: [MEDIA]
If you ever want to go back to stock timing, just take the flywheel back off. When you re-mount it, just keep the flywheel up against the other...
Thanks! I really like these saws.
Cut video: [MEDIA]
Shots of the port work: [ATTACH] [ATTACH] [ATTACH]
Up for sale is a Husqvarna 365 Special that I just finished going through and porting. The piston was borderline, so I replaced it with a Duke’s...
As I said before, they like .375” of advance on the flywheel OD…and that is ported with a smaller combustion chamber and transfer timing fixed....
My local Stihl & Husky dealer just had a nice MS261 for sale for $400....way more saw than an MS250 or comparable Huskies.
I personally wouldn't spend the money on a "reconditioned" saw...but then again, I have a bunch of ported pro saws that I don't need. How long of...
The 362 likes more like 10 degrees of advance. If I were you, I would advance the OD of the flywheel 3/8”. The 362 has a cast-on key on the...
Nice work!
My record was some overgrown silver maple. Iirc it was about 52" diameter. My longest bar is a 36", and it was barely adequate for that job.